Actions with R700 Action Threads

[peterdobson]

We have pre-chambered barrel with R700 action spec. Are there other actions with the same barrel thread?

peter@hirschprecision.com
1.902.829.2932

 

[Harwood]

Defiance runs the same threads as an R700 on some of their actions. I have used Remage prefits on Deviants, Anti, and Tenacity models.

 

[peterdobson]

Thanks Harwood, appreciated.

Peter

 

[bearhunter]

Rem 700 action threads are 1.000 OD x 16tpi. Ruger no1 rifles use the same thread diameter and tpi, but different tenon length.

This might help a bit


Stolle - 1"-1/16 x18 tpi with 30 degree cone
Bat -- 1"-1/16 x 18 tpi with 25 degree cone
Stiller --1"-1/16 x 18 tpi with 30 degree cone and some with 14 degree cone
Farley-- 1"-1/16 x 16 tpi with 30 degree cone
Winchester - 1" x16 tpi flat breech
Ruger ---- 1" x 16 tpi flat breech
Nesika-----1"-16 x 18 tpi 30 degree cone
Hall ------- 1" x 16 tpi 25 degree cone
Howa -----1".022 x 1.5 mm- flat breech
Browning A-bolt -- .922 x 20 tpi flat breech
and some have .996 x 32 tpi flat breech
AMT-- 1"-1/16 X 16 TPI with 30 degree cone
Wichita---1"x16 tpi with flat breech
Sherman--1"x14 tpi with double 30/45 degree cone

 

[guntech]

Rem 700 action threads are 1.000 OD x 16tpi. Ruger no1 rifles use the same thread diameter and tpi, but different tenon length.

Sorry - Remington 700 threads are not 1 inch od.
Try 1.062"

 

[bearhunter]

Sorry - Remington 700 threads are not 1 inch od.
Try 1.062"

My bad Remington 700 receiver threads are 1.062 OD, I know better. brain fart.

 

[guntech]

brain farts, we have all had them...

 

[peterdobson]

Thanks bearhunter and Guntech, you guys have been helpful to me and many others over the years!

It does fit a Defiance Anti action that we have and are waiting on a Savage-style barrel nut from JC Custom Barrels.

Regards,

Peter