Lets start off with a picture
Here are the specs: Remington 700 stainless short action
Accurized by Alberta Tactical Rifle
Rock Creek barrel chambered in 308 win.
22" 1-11.27" twist
Mounted in an AI chassis system
Jewell trigger
ATRS oversize recoil lug
ATRS 20 moa rail
Barrel and action coated in Cerakote FDE
Bolt body coated with Microslick
U.S. Optics anti-cant device
TPS rings
SWFA Super Sniper 16X scope (temporary)
I took my time and did a half assed barrel break-in. I shot a couple shots at 25 yards then moved to 100 yards for zeroing and then I cleaned after 5 rounds. I used the foaming bore cleaner and got no signs of any copper. I then repeated this 3 times before I settled and got serious about shooting some groups. *The test target supplied by ATR was shot with Federal GMM 168 and measured 3 shots at .400" at 100 yards.*
Here is the VERY FIRST group I shot.
This is a load that i had worked up from another 308 i used to own. (shows potential)
And another from the same load
BUT!!! Here is the group of the day 5 SHOTS AT 100 Yards
I am going to do a more comprehensive range report in the future. I will add it to this thread. The first range report I do will be with all factory loaded match/target grade ammo.
Here are some more pics for your viewing pleasure.
Here are the specs: Remington 700 stainless short action
Accurized by Alberta Tactical Rifle
Rock Creek barrel chambered in 308 win.
22" 1-11.27" twist
Mounted in an AI chassis system
Jewell trigger
ATRS oversize recoil lug
ATRS 20 moa rail
Barrel and action coated in Cerakote FDE
Bolt body coated with Microslick
U.S. Optics anti-cant device
TPS rings
SWFA Super Sniper 16X scope (temporary)
I took my time and did a half assed barrel break-in. I shot a couple shots at 25 yards then moved to 100 yards for zeroing and then I cleaned after 5 rounds. I used the foaming bore cleaner and got no signs of any copper. I then repeated this 3 times before I settled and got serious about shooting some groups. *The test target supplied by ATR was shot with Federal GMM 168 and measured 3 shots at .400" at 100 yards.*
Here is the VERY FIRST group I shot.
This is a load that i had worked up from another 308 i used to own. (shows potential)
And another from the same load
BUT!!! Here is the group of the day 5 SHOTS AT 100 Yards
I am going to do a more comprehensive range report in the future. I will add it to this thread. The first range report I do will be with all factory loaded match/target grade ammo.
Here are some more pics for your viewing pleasure.
