ALPHARMS 15SA Shotgun SPECIAL $555.00 UPDATED Page 35!

I received it with the mod choke (#3) installed and 3 other chokes (#1,2,5) and a flashider in the plastic box.
1 - full , 3 - mod , 5 - skeet but book doesn't say what # 2 is . The identifying marks are on the thread end of the choke .
 
image.jpgIs anyone else considering cutting the front site down the height of the rail and running buis front and rear? Or just cutting it down and running a dot only? I'm really leaning towards it, I can't be the only one that thinks it will look amazing?
 

Attachments

  • image.jpg
    image.jpg
    61.9 KB · Views: 630
I got rid of the front and rear sights and mounted a Bushnell TRS-25 with a riser on the receiver with no issues or need to cut anything down....it works well.
 
pipeliner said:
View attachment 50022Is anyone else considering cutting the front site down the height of the rail and running buis front and rear? Or just cutting it down and running a dot only? I'm really leaning towards it, I can't be the only one that thinks it will look amazing?
Click to expand...


...have you not seen all the photos in this thread of guns with the front sight removed? You're definitely not alone. The front sight comes off in literally 30 seconds.
 
CobraGT said:
...have you not seen all the photos in this thread of guns with the front sight removed? You're definitely not alone. The front sight comes off in literally 30 seconds.
Click to expand...

Ha, my bad. Next time I'll go back a few pages! At least I didn't go full ret$&d and start a new thread lol.
 
sigrunes said:
Anything will work really , any clp , balistol , etc , I use G96 in the spray can for a lot of initial and light cleanings.
Click to expand...

I have never owned a plastic rifle I usually give my new rifles/shotguns a good blast with brake cleaner then oil
So just G96 is all I need ?
 
I don't G96 the plastic furniture , a wipe down with a rag is good for that. G96 the metal , patch down the bore , toothbrush scrubbing for small tight areas etc.. Look for any irregularities or roughness/burrs on initial strip and clean , emery cloth works good on rough spots and burrs. Shoot away and break her in , I find most semi shotguns need a good break in period. G96 or a CLP of your choice is all you should need yes , remember to leave some oil on moving parts and metal on metal parts when your done cleaning.
 
sigrunes said:
I don't G96 the plastic furniture , a wipe down with a rag is good for that. G96 the metal , patch down the bore , toothbrush scrubbing for small tight areas etc.. Look for any irregularities or roughness/burrs on initial strip and clean , emery cloth works good on rough spots and burrs. Shoot away and break her in , I find most semi shotguns need a good break in period. G96 or a CLP of your choice is all you should need yes , remember to leave some oil on moving parts and metal on metal parts when your done cleaning.
Click to expand...
Thanks I finly have sum time this weekend to do sum shooting and wanted to clean the shotgun first befor I head out
 
conrad01 said:
so now how much longer till the 2nd shipment?
Click to expand...

There have been some delays in Turkey, probable due to their International situation. The second shipment is now due to leave Turkey on the 12th April, subject to flight availability. Our third order should be shipped by the end of the month so by three weeks we should have a strong inventory and be able to clear all back orders and have guns in stock.
 
Mr Wolverine said:
There have been some delays in Turkey, probable due to their International situation. The second shipment is now due to leave Turkey on the 12th April, subject to flight availability. Our third order should be shipped by the end of the month so by three weeks we should have a strong inventory and be able to clear all back orders and have guns in stock.
Click to expand...

Flight now confirmed for the 18th April.
 
You must log in or register to reply here.
Back
Top Bottom