- Location
- Iles Aux Grenouilles
need a pic.
ALPHARMS 15SA Shotgun SPECIAL $555.00 UPDATED Page 35!
- Thread starter Mr Wolverine
- Start date
Mr Wolverine
CGN Regular
- Location
- Manitoba. Canada
[/URL
- Location
- Toronto, Ontario
Sorry for the poor photos but they are all I have to work with right now. I have been told that the hinge can be removed and the stock used as a retractable only. I should have a sample stock here this week and I will post photos then.
[/URL
Boiiiiing!!!!!!!!!!!!!!!!!!!!!!
trebor2880
CGN Ultra frequent flyer
- Location
- Ontario
Hope you make it a "one per customer" deal. Else we'll be seeing these on E.E. for a thousand bucks.
Mr Wolverine
CGN Regular
- Location
- Manitoba. Canada
Take down: Barrel can be removed to access the gas system by unscrewing the handguard nut, very simple, gas system can then be cleaned. Bolt can not be removed until the upper and lower are seperated. On the fixed stock model you have to remove the butt pad to access the stock bolt that screws into the reciever. Remove this bolt and give the upper a gentle tap with a er mallet and they come apart. This is why I think the folding retractable butt will be preferred by most as no butt pad to remove. Designe and construction all look good to me. I have only fired a few dozen rds but no single problem at all.
Feed ramp: On my two sample guns that were imported as restricted 2 1/2 years ago the feed ramp is part of the polymer lower, I assume this will be the same on the first shipment. Will confirm when they arrive.
Forearm rail: the photo of the shotgun in a previous post is how they should arrive, long top hand guard rail with a short bottom rail, so should be no problem to attach a light etc.
Mr Wolverine
CGN Regular
- Location
- Manitoba. Canada
Mr Wolverine
CGN Regular
- Location
- Manitoba. Canada
Mr Wolverine
CGN Regular
- Location
- Manitoba. Canada
Chargerguy
CGN frequent flyer
Damn that's a good price.
ted_dent
CGN Ultra frequent flyer
- Location
- S. Ontario
Any answer yet John as to whether these will reliably feed 2 3/4" shells? They are so much more available than 3" not to mention a lot more reasonably priced.
Mr Wolverine
CGN Regular
- Location
- Manitoba. Canada
My initial testing, which was limited, would indicate no problem with 2 3/4 inch shells.
doublelung
CGN Ultra frequent flyer
- Location
- Ontario
I also appreciate all the work that you put in to get these firearms reclassified. Most dealers would not bother with all of the legwork involved. For that reason alone I will be ordering one from you tomorrow.
Well, that reason and the fact that I will be the baddest looking turkey hunter in the woods this spring !!!
Great work Sir !!!
Well, that reason and the fact that I will be the baddest looking turkey hunter in the woods this spring !!!
Great work Sir !!!
speedfreak
Regular
- Location
- plap
My 1919 feeds 2 3/4 fine
Also are these the mka 1919 xn model ?
Also are these the mka 1919 xn model ?
diablo_man
Regular
- Location
- BC
Question, are the receiver sight rail and the top handguard rail at the same height? Many of the other turkish mag feds being brought in arent, curious about if the alpha is the same, and how this may affect pic mounted AR iron sights
