ANOTHER New Product Alert: Savage Mark II Enhanced Magazine Release

seamusm said:
I have to agree with IvoB. It is priced too high. Full bottom metal for center fine R700 or Savage is $195. This is just a sliding cover plate.

$125 is about 25% of the cost of a full MDT XRS chassis during black friday. Would you buy this for a mediocre stock or put the money into something leaps and bounds better.

Maybe at $50-$75 it would be worth it but this puts you well on your way to something better. Not to mention there is limited resale value.
Click to expand...

Yes but new products item are often higher as they are new. They been making bottom plates for rem 700 for decades. You worried about prices, buy an anschutz. Some trigger guards are 90$ before taxes.
 
Jahnj0584 said:
Im am machinist and can guess what the actual cycle time is on these things. Best of luck with sales at that price point.
Click to expand...

Then why don't you make them. Just because you are a machinest, doesnt mean you are a great one. How much is your hourly rate? You def wouldnt be making these for 75$.
 
Thunderhog said:
I think we all agree it's an amazing idea, and it's too expensive!.....:(

Make it $75.00 and Shaun will sell hundreds.

Shaun?
Click to expand...

At $75.00 Rick and ATRS may as well close the doors and find other ways to make a living.
$75.00 equates to .5 hour machine shop time, no material, no allowance for fixtures, no R&D costs. I seriously doubt they are making much profit on these.
I am sure Rick wonders why bother to bring new innovations to market with most gun nuts being the cheapest bunch on the planet.
There is a reason these Savage rifles are CHEAP to buy, if they had decent bottom metals to begin with they would be a fair bit more expensive.

If you don't like what is being offered or can't afford it , why crap on the guys who are trying to help provide high quality parts and alternatives for the gun culture?
 
no-one special said:
At $75.00 Rick and ATRS may as well close the doors and find other ways to make a living.
$75.00 equates to .5 hour machine shop time, no material, no allowance for fixtures, no R&D costs. I seriously doubt they are making much profit on these.
I am sure Rick wonders why bother to bring new innovations to market with most gun nuts being the cheapest bunch on the planet.
There is a reason these Savage rifles are CHEAP to buy, if they had decent bottom metals to begin with they would be a fair bit more expensive.

If you don't like what is being offered or can't afford it , why crap on the guys who are trying to help provide high quality parts and alternatives for the gun culture?
Click to expand...




First of all, we all seem to love Rick's new mag release and bottom plate design. ( no-one said they don't like it!)

Second, most agree Rick can charge whatever he wants. In saying that, back to, sell a lot or a little. It's very simple.

Third, ATRS makes gorgeous items period. But it isn't made of gold!......:)

Last, no one is crapping on anyone here.

Rick's stuff rocks, no doubt. If some pay $125.00 for this great item, excellent, others will not.

I would buy four sets if they were priced more reasonable.

This is my opinion only, thank goodness we can still have one.

Keep trudy in power and that will change.......:(
 
Last edited by a moderator:
If I had a rifle for this I would buy one just to help keep ATRS going until they can start selling Modern Sporter receiver sets again.

Whether you like the price point or not ATRS is a company well worth supporting. Just my 2 cents on it.
 
Order in! A while back I saw a 3D printed mag release for the MKII. Wasn't as nearly as pronounced up front and my worry was how it would hold up. This fits the bill.

For the back and forth on the price- I'm sure no one at ATRS is getting rich off a $125 part. I don't mind paying a fair price for a quality product. Hopefully some more new products in the new year.

Thanks Rick and Shaun!
 
tjoke said:
Order in! A while back I saw a 3D printed mag release for the MKII. Wasn't as nearly as pronounced up front and my worry was how it would hold up. This fits the bill.

For the back and forth on the price- I'm sure no one at ATRS is getting rich off a $125 part. I don't mind paying a fair price for a quality product. Hopefully some more new products in the new year.

Thanks Rick and Shaun!
Click to expand...

Agreed.
 
Thunderhog said:
I would love to hear Rick or Shaun's thoughts on how they came up with the $125.00 price tag on this cool floorplate and magazine release design.
Click to expand...

If I had to guess, it’s the same way they (and most producers) price almost everything else. Time+material x standard markup. I’d be shocked if they came out and showed everyone how they price things. Bad idea IMO. nasty can of worms there. And honestly, no one’s business’s but their own.

And I agree too, the price tag is a little higher than what I’d like. Especially for a stocking stuffer haha.
 
tjoke said:
Order in! A while back I saw a 3D printed mag release for the MKII. Wasn't as nearly as pronounced up front and my worry was how it would hold up. This fits the bill.

For the back and forth on the price- I'm sure no one at ATRS is getting rich off a $125 part. I don't mind paying a fair price for a quality product. Hopefully some more new products in the new year.

Thanks Rick and Shaun!
Click to expand...

The one you likely saw, is the gentleman who approached us and began this little side project.
The pictures of the black ones on the laminate stock are actually his rifle when we sent him the first unit off the line.

Thank you for your order! Processing it right now.

Thunderhog said:
I would love to hear Rick or Shaun's thoughts on how they came up with the $125.00 price tag on this cool floorplate and magazine release design.
Click to expand...

Pretty easy really... material + time... saw what the actual price was going to be, said oh. uhmm.... and dropped it to $125.00.
 
ATRS Shaun said:
The one you likely saw, is the gentleman who approached us and began this little side project.
The pictures of the black ones on the laminate stock are actually his rifle when we sent him the first unit off the line.

Thank you for your order! Processing it right now.
Click to expand...

Haha You are 100% correct! Went back through old posts and same rifle! Thanks Lockon/ ATRS!
 
ATRS Shaun said:
The one you likely saw, is the gentleman who approached us and began this little side project.
The pictures of the black ones on the laminate stock are actually his rifle when we sent him the first unit off the line.

Thank you for your order! Processing it right now.



Pretty easy really... material + time... saw what the actual price was going to be, said oh. uhmm.... and dropped it to $125.00.
Click to expand...


Fair enough, thanks for taking the time to explain.

I'm in for one.....:)
 
This is a great upgrade. Maybe they could fix the fitment on the fv-sr models with polymer stocks or release and instruction on the “slight fitment” as well as including the required washer.
If they were direct simple fit I would already have ordered one.
 
Will these enhanced magazine release plates fit a Savage FVSR Troy Landry Signature Edition?.....:) Mark II 22 LR.

And does one use the factory Savage take-down bolts?
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom