Anyone else collect carcanos???

that's something I'm going to have to look into. This is my favourite carbine, not in 7.35 but its still pretty uncommon. Its a navy TS that went through a german depot, that's why the bolt is blued and it has the nice depot cartouche on the wrist.

thumbnail_image1_zpsvt0sutuf.jpg

thumbnail_image3_zpsgaqrnikx.jpg

thumbnail_image4_zpsivc0oqxr.jpg

thumbnail_image5_zps3uhd6hdp.jpg
 
The only other two I own: (I'd better do something about that, hadn't I?)

Top one is a FAT42 with a straight bolt. Bubba's sister got the sand paper out on this one.

Bottom one is a FAT 43 with a bent bolt. Both have the weird "long range" sight that can be folded away. Note the wicked inletting to allow the sight to lay down out of the way. Haven't fired either of these. They are nice sleek rifles that don't garner much attention in general. Most can be had at gun shows relatively cheap.

View attachment 223121View attachment 223122View attachment 223123View attachment 223130
 
Last edited:
yep, the m41s seem to be the most common. a ton came to canada. they should both have straight bolts though. so at some point the bottom rifles bolt must have gotten mixed up with a carbines bolt. id check headspace before i shoot it to be safe. thanks for sharing pics:)
 
It's quite accurate, the bore is close to mint. But the scope mount is cheap and it loses it's zero easily. I am convinced Oswald used iron sights, which can still be used with this side mount. It would also explain his "high" head shot (if he aimed at his upper torso) since the battle sights are for 200m and JFK was only 81m away. I am likely going to do some more testing of the WCC surplus ammo next year with a timer - scope vs irons.

Beautiful "Oswald" rifle Sledge! Long ago I decided not to drill and tap my Terni 1941 and mount the scope I bought from the same outfit that sold one to Oswald. Thought the rifle did not deserve to be drilled for such a cheap scope and now I regret selling it. I also believe that Oswald used the iron sights and not the scope.

I was never able to source the Western cartridge ammo and would still like to get some.
 
Last edited:
carcano converted to 8mm for an arab contract. at one time there was Arabic writing on the stock that labeled it a training rifle. that's worn away with time but there are traces. this is not a german conversion.
thumbnail_image4_zpshgc4knji.jpg

thumbnail_image1_zps0tzmizml.jpg

thumbnail_image2_zpsmimrosji.jpg

thumbnail_image5_zpsp3l0xqaa.jpg
 
that's something I'm going to have to look into. This is my favourite carbine, not in 7.35 but its still pretty uncommon. Its a navy TS that went through a german depot, that's why the bolt is blued and it has the nice depot cartouche...
Buddy, I'm always here to help you should you decide to get rid of this refurbished rifle, I'm not picky.
 
Alright so ill share mine nothing extraordinary but the collection is slowly growing

So from up to down. First is a terni 1918 converted to a 91/24 in 1927, second is a brescia FNH 1940 91/38 TS in 6.5.
Third is one of my favorite. Its an unissued M41 made by terni under german occupation after italy surendered to the allies. Last known terni serial digit end in september 1943 and is BH ###X. Mine is BG ###X and has cutout on the sight to put a sight hood. Was ftr after the war
And last is a M91 rifle captured at some point by the greek or sent to greece to fight the communist
4568-C707-1597-4-CD3-A8-A5-CF481347-FE82.jpg

C9-BA17-DE-048-D-472-F-AA64-7-BF9-A2-B28-ED3.jpg
E27-E1-F55-62-DE-4-F9-C-BFC0-10-FE13-DEB050.jpg
 
Last edited:
Now they're coming out of the woodwork! :)

Little story behind my little 7.35. There used to be a really neat gun shop north of Moosomin, SK, operated by Ken and Marshall McLeod. They were two real gentleman. Ken put me under his wing and would phone me whenever he got a military rifle in. I never turned him down on a deal, and he would wrap up the rifle and put it on the bus for me. I bought some real dillies from those boys. Oh, for the good old days. :(
 
Back
Top Bottom