APC223 Non restricted whos getting one ?

Especially since wolverine brought one in to send off to the rcmp in that exact same set up (18.6" bbl with short h/g)

I dunno. Kinda bummed out about it

I may even just consider getting the restricted length for that specific reason
 
bfiles said:
Especially since wolverine brought one in to send off to the rcmp in that exact same set up (18.6" bbl with short h/g)

I dunno. Kinda bummed out about it

I may even just consider getting the restricted length for that specific reason
Click to expand...

yeah, I'm pretty tempted to do that too, it also means sooner delivery and then I could just get a NR barrel down the line.

Wolverine said they arent QD but whats with all the screws right on the barrel extension then? obviously I'm just theorizing since theres no actual info on that, but I honestly can't imagine it's a impossible process to swap barrels.
NYz9CC1.jpg
 
kennyclone said:
yeah, I'm pretty tempted to do that too, it also means sooner delivery and then I could just get a NR barrel down the line.

Wolverine said they arent QD but whats with all the screws right on the barrel extension then? obviously I'm just theorizing since theres no actual info on that, but I honestly can't imagine it's a impossible process to swap barrels.
NYz9CC1.jpg
Click to expand...

It very well could be but without any videos I have found showing how to take down the rifle I couldn't say for sure

On the other hand, I like the flash hider that comes with it more then the 2 port comp for extra $$$
 
kennyclone said:
yeah, I mean I have extra muzzle devices lying around too, worst case I swap it with my MB556k.

very tempted to get the Restricted model at this point though.
Click to expand...

European companies tend to use M15X1 - US companies rarely make M15X1 devices, even if they maybe present in the catalogue. Almost all 5.56 in the US has the standard AR 1/2X28.

Better ask wolverine supplies about the thread pitch, as you may not have a lot of choices in muzzle devices down the road unless you will be shopping in europe.
 
with wolverine stating the NR version they have has a 19" barrel, maybe a cut and re thread is possible while staying above the NR length requirement. Does not matter one bit to me that it has a metric thread though
 
Brian46 said:
with wolverine stating the NR version they have has a 19" barrel, maybe a cut and re thread is possible while staying above the NR length requirement. Does not matter one bit to me that it has a metric thread though
Click to expand...

Unless you are constantly swapping out muzzle devices to get the newest and shiniest, it is a none issue for most.
 
Jrji said:
What's the price range??
Click to expand...

Its on the wolverine supplies forum


Part # BT-36056 B&T Sporting Carbine APC223 dedicated Canadian Version. Non Restricted
• Cal ,223 Rem (5.56 Nato chamber) semi automatic only
• Barrel length 477 mm Factory fitted loather Walther
• “Match length” hand guards.
• Ambidextrous safety & magazine release
• Two magazines 5/30 pinned
• Vertical foregrip
• Open sights to fit NAC (Nato Accessory rail)
• Flash hider
• Foldable stock (Skelton)
• 3 rubber rail covers
• Cleaning kit, sling, case and manual

Regular price $3,900.00 Introductory special $3,600.00 plus shipping and tax

Please note, short hand guards will not work with the gas system on the long barrel
A stock with a cheek piece is available as an option $492.75 but the stock supplied is more ridge and enhances accuracy
A two port compensator $119.95 is available as an option but better accuracy has been obtained with the flash hider.

Part # BT-36058 B&T rifle APC223 restricted
• Cal .223 Rem (5.56 mm Nato chamber)
• Barrel length 264 mm
• Ambidextrous safety & magazine release
• Two magazines 5/30 pinned
• Vertical foregrip
• Open sights for NAR (Nato Accessary rail)
• Two chamber compensator
• Foldable stock (Skeleton)
• Three rubber rail cove
• Cleaning kit, sling, case and manual

Regular price $3,675.00 Introductory special $3,385.00 plus shipping and tax
A retractable stock is available as an option $845.95

We can accept orders now with a $200 deposit, ETA to e confirmed.
 
according to wolverine also, "Barrel removable, appears to be simple, remove 8 screws and knock her out of the receiver."

so looks like I'll be getting that restricted model first and then a NR barrel down the line.
 
You must log in or register to reply here.
Back
Top Bottom