AR-15's

Trinimon said:
That's pretty interesting looking one. How's it run? Sweet rifle BTW!
Click to expand...

I got a chance to take her out to the range, and left some pics in another thread but just in case you didn't see them there, the brake works great. It makes spectacular fireballs, but it does a good job keeping the muzzle from moving a ton:

http://4.bp.########.com/-dIi4q-SIM6U/VlVFQEDDKoI/AAAAAAAAZiA/-PkdkQ_I5hE/s1600/Screenshot_2015-11-23-12-10-03.jpg

http://2.bp.########.com/-TNkc5G1YKZE/VlVFUXmPhJI/AAAAAAAAZi0/24HkiWzqtKs/s1600/Screenshot_2015-11-24-06-46-07.jpg

http://4.bp.########.com/-BvFmUbvww34/VlVFWtcITgI/AAAAAAAAZjQ/rpyoXjWd6Dc/s1600/Screenshot_2015-11-24-06-48-17.jpg/img]

I ended up changing grips to keep my fingers away from the heat. It actually wasn't that bad.

[img]http://2.bp.########.com/-8Aa2sYnUgls/VlVFRSRCzLI/AAAAAAAAZiQ/AEB4-hPW0uc/s1600/Screenshot_2015-11-24-06-41-40.jpg

http://2.bp.########.com/-DPuTt-Mz0YI/VlVFSizuCjI/AAAAAAAAZik/QNyXTzHbu30/s1600/Screenshot_2015-11-24-06-42-43.jpg

http://1.bp.########.com/-33aBzBw9KiI/VlVFS76HryI/AAAAAAAAZio/VFhSx8i1coI/s1600/Screenshot_2015-11-24-06-44-04.jpg


In comparison though, I have another brake on a different rifle that does just a good a job of controlling muzzle rise, but doesn't make nearly as much fire:

http://4.bp.########.com/-BNyByDt2IVU/VlVFQbJLybI/AAAAAAAAZiE/G4S1Y7XoUpA/s1600/Screenshot_2015-11-24-06-40-44.jpg
 
The difference in barrel length is probably more important than the model of your brake. You could try to switch them to compare the result. The shorter the barrel, the more powder burns outside the barrel.
 
D4S_7891-small.jpg
 
"Un plugged" Classic AR-15, This one not only says Colt on the side. It has the prancing horse with arrow logo. In this day of modern go fast gadgetry this really is kinda fun to shoot. It's light and absolutely reliable... If you don't shoot anything heavier than 55 grain bullets.
P1010698_zpssoyup83g.jpg
[/URL][/IMG]
 
L
Mister Donut said:
I got a chance to take her out to the range, and left some pics in another thread but just in case you didn't see them there, the brake works great. It makes spectacular fireballs, but it does a good job keeping the muzzle from moving a ton:

http://4.bp.########.com/-dIi4q-SIM6U/VlVFQEDDKoI/AAAAAAAAZiA/-PkdkQ_I5hE/s1600/Screenshot_2015-11-23-12-10-03.jpg

http://2.bp.########.com/-TNkc5G1YKZE/VlVFUXmPhJI/AAAAAAAAZi0/24HkiWzqtKs/s1600/Screenshot_2015-11-24-06-46-07.jpg

http://4.bp.########.com/-BvFmUbvww34/VlVFWtcITgI/AAAAAAAAZjQ/rpyoXjWd6Dc/s1600/Screenshot_2015-11-24-06-48-17.jpg/img]

I ended up changing grips to keep my fingers away from the heat. It actually wasn't that bad.

[img]http://2.bp.########.com/-8Aa2sYnUgls/VlVFRSRCzLI/AAAAAAAAZiQ/AEB4-hPW0uc/s1600/Screenshot_2015-11-24-06-41-40.jpg

http://2.bp.########.com/-DPuTt-Mz0YI/VlVFSizuCjI/AAAAAAAAZik/QNyXTzHbu30/s1600/Screenshot_2015-11-24-06-42-43.jpg

http://1.bp.########.com/-33aBzBw9KiI/VlVFS76HryI/AAAAAAAAZio/VFhSx8i1coI/s1600/Screenshot_2015-11-24-06-44-04.jpg


In comparison though, I have another brake on a different rifle that does just a good a job of controlling muzzle rise, but doesn't make nearly as much fire:

http://4.bp.########.com/-BNyByDt2IVU/VlVFQbJLybI/AAAAAAAAZiE/G4S1Y7XoUpA/s1600/Screenshot_2015-11-24-06-40-44.jpg
Click to expand...

Use good shooting gloves, at least on the left hand.
 
Just finished another build with a 20" SS Jury Barrel in 30 HRT. NEA grey coloured billet set coupled by Yankee Hill push/pull pins and a CMMG bolt carrier paired with a DD bolt. This is charged with a BCM large handle and held onto with MFT furniture. The upper is completed off with a 15" MI slim rail over a JP adjustable clamp on gas block. The lower is outfitted with an SP billet mag release, Magpul B.A.D. Lever and CMMG LPK.

Scope will be change to a 2x10 Vortex to take advantage of the 20's". Also waiting for a precision butt stock assembly from Brownells.

e155c987f465c3486a20d1c5227614de_zpssjorkokn.jpg

987819421369ec5f51cdd3e3b09ce916_zpseumnrqkf.jpg

64c064f47e0eb1bc5d7cc008e17cd7f3_zpszvggt7yo.jpg
 
Last edited:
Another suprise Sunday deliver of a Brownell precision stock assembly. Changed out the temporary collapsible buttstock for my planned stock to complete my long range 30 Herrett.

7f466dc6cb52b1f9e5e765ba501b4192_zps3wn6sjpl.jpg
 
Newest addition:

http://1.bp.########.com/-T_oxRRH83f8/Vm-sXhhfCBI/AAAAAAAAZ78/Uryzzwl4t3Y/s1600/DSC_0342.JPG

http://4.bp.########.com/-PYUhwLEJ3j8/Vm-sabdYo8I/AAAAAAAAZ8E/1AffjEn82yA/s1600/DSC_0343.JPG

http://4.bp.########.com/-5kvbijvOv3A/Vm-sbpn6yHI/AAAAAAAAZ8M/wviJZ9AABd8/s1600/DSC_0344.JPG

http://3.bp.########.com/-QwnLqxHpYnA/Vm-sdK8fkII/AAAAAAAAZ8U/yicTk26O2TA/s1600/DSC_0345.JPG

With the rest of the family:

http://1.bp.########.com/-OeowMmYvLgU/Vm-srsG5xNI/AAAAAAAAZ9Q/rJwuGY8UZCk/s1600/DSC_0392.JPG
 
You must log in or register to reply here.
Back
Top Bottom