AR-15's

Hello all!!

Finally finished project over the weekend and thought I would share. After helping Canuckle head, doing some research, and finally wanting to take Carbonrod up on his many invites to shoot service rifle, It thought I should build something appropriate to the task, and have the following to show for it. Spec in breif:

  • 20 Inch Hbar Colt barrel, chrome lined, 1-7 twist with A2 flash hidder (about 1k trhought it)
  • colt S/A bolt and carrier group (MP tested)
  • RRA A3 upper reciver
  • Badger Ordanance Ambi Charging handel
  • Kac M5 Ras with cover and Vert grip
  • Leupy Varri X-III 4.5-14*50 with Mil-dot reticule, side focus and sun shade
  • ATR lower with Select bushmaster spring and pin kit
  • Lonestar Grip pistol grip with storage compartment
  • RRA national match trigger
  • RRA ambi selector
  • Colt A2 stock with Accuracy speaks 3-way adjustable butplate
  • 1907 Style Sling

If I have missed anything ask, and I will do my best to pin it down. Im pretty pleased how she turned out and would still like to add a couple of finishing touches. But for now she looks like this:

Sr-s-01.jpg


Sr-s-02.jpg


Sr-s-03.jpg


Sr-s-04.jpg


Sr-s-05.jpg


Sr-s-06.jpg


Sr-s-07.jpg


Sr-s-08.jpg

Look forward to your comments.

regards

AbH
 
Last edited:
AbHobbyist said:
Hello all!!

Finally finished project over the weekend and thought I would share. After helping Canuckle head, doing some research, and finally wanting to take Carbonrod up on his many invites to shoot service rifle, It thought I should build something appropriate to the task, and have the following to show for it. Spec in breif:

  • 20 Inch Hbar Colt barrel, chrome lined, 1-7 twist with A2 flash hidder (about 1k trhought it)
  • colt S/A bolt and carrier group (MP tested)
  • RRA A3 upper reciver
  • Badger Ordanance Ambi Charging handel
  • Kac M5 Ras with cover and Vert grip
  • Leupy Varri X-III 4.5-14*50 with Mil-dot reticule, side focus and sun shade
  • ATR lower with Select bushmaster spring and pin kit
  • Lonestar Grip pistol grip with storage compartment
  • RRA national match trigger
  • RRA ambi selector
  • Colt A2 stock with Accuracy speaks 3-way adjustable butplate
  • 1907 Style Sling

If I have missed anything ask, and I will do my best to pin it down. Im pretty pleased how she turned out and would still like to add a couple of finishing touches. But for now she looks like this:

Look forward to your comments.

regards

AbH
Click to expand...

Nice rig Richard.
 
Just realized I didn't have a picture up on this thread. Some beautiful guns in here.

my black and tan. Trying to get comfortable with the iron sights before adding some form of optics. Still figuring out the front sling mount as well

IMG_4420.jpg


Magpul CTR stock
Magpul grip, rail covers, ranger plates, pmags
Rock River Arms LAR-15 mags
Tango Down stubby vertical grip
DD Omega 7.0 rail
Troy BUIS
Troy ambi sling mount
Stag lefty, 16" barrel 1/9 5.56mm
Armalite lower 5.56mm
Armalite LPK with two stage match trigger
ambi safety

36" VooDoo Padded Weapons Case and iM3100 Storm Case
 
Not an AR15 but I think this will do:

101_1888.jpg
[/IMG]

Armalite AR10 A2 NATO post ban. After five years finally broke down and bought my friend's safe queen.
 
You must log in or register to reply here.
Back
Top Bottom