Ar180b folding stock

[Oddbawl]

Has anybody out there fabbed a folding wire stock a la Cz858? It seems it would be pretty easy using the Stormwerkz adapter.

 

[anark]

Stormwerkz has a folder already...

 

[Oddbawl]

Where? Didn't see it on the website... I'm talking about a stock, not adapter.

 

[Armedsask]

They have a folding mechanism, you just add the skeletal stock or make your M4 stock fold.

This stock folds.

 

[Urban_Ops]

There are a couple of StormWerkz stock adapters and a variety of stocks which can be mounted on the 180B.
Here are a couple of sidefolding stock setups you can configure:
1) StormWerkz Ar-180B Stock Adapter, Stock Folding Mech., ACE "AKFX" Skeleton stock(available at dsgarms.com)
2) StormWerkz Ar-180B Stock Adapter, Stock Folding Mech., Universal Carbine Stock Adapter, any Ar-15 carbine
type
collapsing stock (m4, SOCOM, Magpul, Colt, Tapco, etc.).
3) StormWerkz Ar-180B Stock Adapter, Stock Folding Mech., Factory Stock Adapter, original factory stock.
For non-side folding just as above but without the Stock Folding Mechanism.
Hope this helps.

-Josh

 

[Oddbawl]

It seems it would be pretty easy using the Stormwerkz adapter.

I guess my post wasn't clear enough. It's not the folding adapter that's in question, just the shoulder touching bit. I was thinking of using the Stormwerkz folding adapter, fabbing a wire stock out of steel or AL to bolt to it. I was just asking if anyone had done one.

 

[Urban_Ops]

I haven't seen anyone do it with a Cz858 folding stock yet. It wouldn't be hard to do though.

 

[Oddbawl]

Probably not worth hacking up a 858 stock, but copying one and welding it up could prolly be done on the cheap. What do you guys think, aluminum or steel?

 

[Greenhorse six]

You'd think there would be a market for it up here.

 

[FraserJ20]

1) StormWerkz Ar-180B Stock Adapter, Stock Folding Mech., ACE "AKFX" Skeleton stock(available at dsgarms.com)

I like the ace stock look but where can I get one in Canada? dsgarms.com says they won't export outside of the US, any help?



jay

 

[j_sublime49]

Been thinking of making a tube stock like the ACE for some time, I'd like to see what you come up with. I'd also like to find a Canadian source for an ACE stock.

Regards,

J

 

[Oddbawl]

I'll cobble something together as soon as my 'werkz folding adapter shows. Just ordered it today. I can pretty well guarantee whatever I come up with will be more spartan than an ACE, we'll see what happens.

 

[j_sublime49]

Looking forward to it...

Good luck

 

[Armedsask]

P&D Enterprise is the ACE dealer in Canada. I'm not sure if the recent change in ownership of ACE has affected their importing.

 

[klrklr]

You'd think there would be a market for it up here.

I would buy!!!!!

 

[klrklr]

P&D Enterprise is the ACE dealer in Canada. I'm not sure if the recent change in ownership of ACE has affected their importing.

Good luck getting an ACE stock up here I tried last month.

 

[Oddbawl]

Okay guys, a little help needed. I need the measurements of the mounting plate on the stock attachment side of the 'werkz adapter. I can start playing with this and have it ready when my adapter arrives. Also, if anybody has a factory 858 folder, I'd like to know the approximate diameter of the stock, as well as weight.

 

[Oddbawl]

Here's what a torch, welder and too much time on my hands does. Prototype MKI, without the folder on it- I haven't cut the stock mounting thingy off yet, waiting on the folder parts, but you get the idea. It seems to me like it's missing something. Any ideas?

 

[aftermidnight]

needs cheekweld.. or good dental plan...

looks good !

 

[Oddbawl]

That'll come in the fine tuning portion after the folder's installed. Recoil pad too, can't afford one o' them fancy titanium collarbones...