Best Shotgun for three gun

Pump action KSG.. The time you spend pumping is not a problem considering that you don't have to reload most of the time.
15 rounds in the mag.
 
Curious to know what IRG does about the 8+1 3'' shell m extension tubes for Canadian orders?
Click to expand...

Not to worry.

IRG knows our Canadian laws very well.

They take a wood dowel, cut it to the appropriate length, then glue it into the end-cap on the extension.
Giving you the legal maximum capacity for your shotgun.

You can remove the wooden dowel with some simple hand tools, and replace it with something else if you like.
 
Dexter Morgan said:
Not to worry.

IRG knows our Canadian laws very well.

They take a wood dowel, cut it to the appropriate length, then glue it into the end-cap on the extension.
Giving you the legal maximum capacity for your shotgun.

You can remove the wooden dowel with some simple hand tools, and replace it with something else if you like.
Click to expand...

Oh I wasn't worried about them not knowing, but more curious as to their solution.

Tks
 
As long as it doens't have that collapsible stock! I thought I'd like it, but shot w/ it and confirmed that it wasn't for me. Wouldn't turn one down for a standard stock w/ field grip.

A real soft shooter too.
Click to expand...

Yes, I find the standard stock to be better for operating safety and reloading.

 
That could be real cool if you used a Tac Star 2 shot extension. They list that extension (and the packaging reflects this) as for the Nova and not for any semi. With the logic of the LAR15 mags one could ride a "this mag extension is for a pump not a semi" and run with a mag holding 7+1+1. Anyone see why this wouldn't fly?

Moe

Dexter Morgan said:
That looks pretty cool.

I also like the looks of this one from CZ;

http://www.irunguns.com/product.cz-...matic-12-ga-20-3-black-synthetic-black-finish

From what I hear, the 20" CZ fits a Benelli Nova +2 extension quite nicely.
Click to expand...
 
magazine extension is not a magazine.
For a tube fed shotgun, the magazine is the part screwed into the receiver.

Its like putting an extended basepad on a pistol mag. The mag is still the mag, you just added to it.
 
OK was hoping this would work out but I see your point. Will pinning said extension and mag to 5.9 rds of 3" shells on a semi be ok on a shotgun labeled as 2.75 and 3" , thus allowing 6 2.75 shells?

Moe

pauls said:
magazine extension is not a magazine.
For a tube fed shotgun, the magazine is the part screwed into the receiver.

Its like putting an extended basepad on a pistol mag. The mag is still the mag, you just added to it.
Click to expand...
 
You must log in or register to reply here.
Back
Top Bottom