blackhawk spec ops 2 stock
- Thread starter BCrecce
- Start date
I'd say it's an improvement over the gen 1 due to less flex in the stock and as a result less cheek slap when you are low on the stock.
These stocks work best with some optics or flip up sights with a higher sight line then a bead sight.
The way the stock mounts to the receiver is a bit more complicated(needs a tool) then the old one due to the change in the anti-recoil design but it's no biggie if you aren't changing the stocks frequently.
The grip comes with different sized rubber inserts but it's a bit hokey and the shape could be better for my hand but it's OK.
Recoil reduction works for me.
I'd try a wanted to buy if you haven't already..... some people don't like these stocks. (probably because they are using a low cheek weld with the stock extended for length which increases the flex during recoil.)
These stocks work best with some optics or flip up sights with a higher sight line then a bead sight.
The way the stock mounts to the receiver is a bit more complicated(needs a tool) then the old one due to the change in the anti-recoil design but it's no biggie if you aren't changing the stocks frequently.
The grip comes with different sized rubber inserts but it's a bit hokey and the shape could be better for my hand but it's OK.
Recoil reduction works for me.
I'd try a wanted to buy if you haven't already..... some people don't like these stocks. (probably because they are using a low cheek weld with the stock extended for length which increases the flex during recoil.)
Might actually benifit from the higher sightline, w/14" barrel my bead dissapears, if I could find someone making a higher brass bead that would be the cats pajamas.
The recoil reduction and adjustable stock is more to get the wife comfortable with the scattergun
The recoil reduction and adjustable stock is more to get the wife comfortable with the scattergun
I'm guessing its a Chinese gun or at least the barrel.
You should Pm badboybeeson and see if he has any XS rails with the peep sight. He was selling a bunch a while back and if you drilled and tapped and then mounted the rail you could use a banded XS front sight and get your higher sight line and even better have the option of mounting a red dot on there for an even higher sight line and easy aim point!
You should Pm badboybeeson and see if he has any XS rails with the peep sight. He was selling a bunch a while back and if you drilled and tapped and then mounted the rail you could use a banded XS front sight and get your higher sight line and even better have the option of mounting a red dot on there for an even higher sight line and easy aim point!
Went down to all my local gun shops today to no avail, one shop had a blackhawk folder in stock that would keep me barely legal. No one had ever heard of a higher brass bead though, one redneck insisted on me using a red tube from a wd-40 can snipped and slipped over the bead...might actually try that tonight
Went down to all my local gun shops today to no avail, one shop had a blackhawk folder in stock that would keep me barely legal. No one had ever heard of a higher brass bead though, one redneck insisted on me using a red tube from a wd-40 can snipped and slipped over the bead...might actually try that tonight
That's funny I did the same thing once, hot melt glued an extension onto the bead made from a pop rivet.
If you want to keep a bead you will need to get a pedestal base soldered onto the barrel and then mount a bead in the base or you might get enough height from the XS tritium big dot that epoxies over the existing bead.
I don't know why Chris @ Canada Ammo can't get the Chinese to come up with a base and mount a bead that actually works......
Ha... pop rivet sounds even better pletty of those lying around, jb weld and a stainless rivet sounds about right.
Canada ammo was out of stock of the 12" grizzly w/ghost sights, so I settled on a hp-9, didnt think the bead was going to be such a hassle
Canada ammo was out of stock of the 12" grizzly w/ghost sights, so I settled on a hp-9, didnt think the bead was going to be such a hassle
Finally pulled the trigger on a phoenix kicklite stock yesterday, could not find a blackhwak in stock anywhere. The guys at highcal.ca have great prices so I picked up a magpul front end and a 6 shell side saddle, now the wait begins for magpul to show up next week.
