thelowlife
Member
- Location
- Sudbury Ontario
That's the info I'm looking for AWESOME! Your setup is exactly what I want.. Pepper Laminate with some checkering...
Boyd's Hunting Rigs.. Who's got 'em?
- Thread starter D3TH_OVRH3D
- Start date
hometownhero
CGN Ultra frequent flyer
- Location
- Toon Town, Sk
The checkering on mine is hunter #2 if I remember right
Just threw this on
Its a Stevens 200 223. Id have to say the fit was pretty good. thumbs up here
Im going to bed it and throw a pillar on the rear action screw only, but I want a metal trigger guard first. Boyds didnt have em, but I think Brownells will. Does anyone in Canada carry these?
cheers
Its a Stevens 200 223. Id have to say the fit was pretty good. thumbs up here
Im going to bed it and throw a pillar on the rear action screw only, but I want a metal trigger guard first. Boyds didnt have em, but I think Brownells will. Does anyone in Canada carry these?
cheers
hometownhero
CGN Ultra frequent flyer
- Location
- Toon Town, Sk
Measure the action screw holes and match it with the stock on boyds site. The stocks come with that small rubber one in the pic above. They have the option to add a 1" one though as well. The limit is $500 so might as well et everything on it you want.
The stock comes complete with pad. Like hth said, you have to find out it your stevens is a center feed or staggered feed. Mine is a staggered feed so my actions screws measured 4.25". The center feed is about a half inch longer.
One thing you will have to get with this stock is the longer action screws with it. Boyds have these as well for 4 bucks.
Just check out the stocks for the stevens 200 on the boyds site. They have all the info on the site to figure out what you need.
http://www.boydsgunstocks.com/?utm_...n=New+Face+of+Boyds'+Website&utm_medium=email
And now the T-3...............
And now the T-3...............
Marlin XS-7 7mm-08
Is this Boyds Nutmeg or Walnut?
Was wondering what Boyds Forest Camo would look like. Nicely done.
hometownhero
CGN Ultra frequent flyer
- Location
- Toon Town, Sk
Nutmeg. Their walnut stocks arent laminated.
I have a REM 799, Mini mauser action with pencil barrel made by Zastava and dropped in a Boyd's nutmeg.... Nice and compact and easy to carry for coyote sets.... Really wih Boyd's had one for the rem 700 with detachable mag option... would be on it like a fat kid on a smartie.....
hometownhero
CGN Ultra frequent flyer
- Location
- Toon Town, Sk
They do.
ht tp://www.boydsgunstocks.com/product.htm?pid=18460&cat=1223
ht tp://www.boydsgunstocks.com/product.htm?pid=18470&cat=1223
Looks like you have one of each, the Classic and Prairie Hunter?
If so, which one do you like the best for hunting?
If so, which one do you like the best for hunting?
Ive got a couple, Marlin xl7 prairie hunter on top, and my 8x57 husky bear killin machine in a charles daly inlet classic for the aftermarket bottom metal.
- Location
- Alnwick Haldimand
Hi guys!
I called Boyds stocks and asked them a few questions. Firstly, I told them I was left handed and have always shot right handed bolt rifles. Most stocks I can shoot just fine with, with the exception of rollover cheek pieces.
Ideally, I would like to stock my Ruger M77, Tang Saftey, with thier "Prairie Hunter" stock. But am unsure if it would be comfortable for me.
I wanted to ask them if they could inlet a stock for a right hand bolt, and put a left handed cheek piece on it.
When I talked to the Boyds stocks "lady", and she told me that thier stock designs would not be suitable for a left handed shooter! And that they dont make custom options for thier stocks.
Man! Now I am not sure if she even has a clue about thier stocks, or if I should just forget about ordering one! I am very dissappointed!
I even seen in the left handed stock section that they offer left hand prairie Hunter. And it says :
Left Hand Stocks
Boyds'® Replacement stocks come in a variety of makes and models for the Left Hand shooter. Boyds'® left hand stocks are available in the following designs; Classic, Featherweight Thumbhole, Prairie Hunter, and Sterling. Boyds'® also offer 3 different ambidextrous stocks in the following designs; SS Evolution®, Rimfire Hunter, and TactiCool. We offer options for a Left Hand Stock Right Hand Action and Left Hand Stock Left Hand Action.
Am I just SOL? Or will the standard right hand stocks suffice, as the factory ones have for years?!
I called Boyds stocks and asked them a few questions. Firstly, I told them I was left handed and have always shot right handed bolt rifles. Most stocks I can shoot just fine with, with the exception of rollover cheek pieces.
Ideally, I would like to stock my Ruger M77, Tang Saftey, with thier "Prairie Hunter" stock. But am unsure if it would be comfortable for me.
I wanted to ask them if they could inlet a stock for a right hand bolt, and put a left handed cheek piece on it.
When I talked to the Boyds stocks "lady", and she told me that thier stock designs would not be suitable for a left handed shooter! And that they dont make custom options for thier stocks.
Man! Now I am not sure if she even has a clue about thier stocks, or if I should just forget about ordering one! I am very dissappointed!
I even seen in the left handed stock section that they offer left hand prairie Hunter. And it says :
Left Hand Stocks
Boyds'® Replacement stocks come in a variety of makes and models for the Left Hand shooter. Boyds'® left hand stocks are available in the following designs; Classic, Featherweight Thumbhole, Prairie Hunter, and Sterling. Boyds'® also offer 3 different ambidextrous stocks in the following designs; SS Evolution®, Rimfire Hunter, and TactiCool. We offer options for a Left Hand Stock Right Hand Action and Left Hand Stock Left Hand Action.
Am I just SOL? Or will the standard right hand stocks suffice, as the factory ones have for years?!
Last edited:
