Build - Stag Arms Stag-10 CDN Rifle

Hey guys, I need an 6.5 CM /.308 NR barrel, medium profile ,GB and a 14 in Handguard.
And I need it now ... lol
Can anyone point me in the right direction? In Canada and in stock.

Thanks
 
Last edited:
CODFan said:
Help me figure this out. last Time I estimated I was off by almost half a pound.

Component
Weight (Oz)
BSF Barrel31.10
Stag 10 Upper/Lower Combo
Flash Hider
2.90
JP BCG
12.96
JP Buffer
Charging handle
Handguard
5.12
Gas Block
0.8
Buffer Tube
Buttstock
Misc
Total52.88
3.31
Click to expand...

My guess is 7.1-7.2 lbs based off my rough AR10 parts database . Guestimate because some MFG's fudge their weights a bit and the receiver is an educated guess based on similar ones (Aero M5). And that Brigand Edge 15" rail is actually 6.3 oz in DPMS High config, 5.1 oz is the AR15 version.

The Stag 10 receiver set is going to be about 25 oz stripped, complete with grip (3 oz), forward assist + dust cover (1 oz) and Stag's 308 LPK (~7 oz) I will say around 36 oz in the complete Stag receiver.

SCS-10 Buffer from JP about 8 oz. CH is 1.5 oz . BCL stock is roughly 9 oz depending on G1 vs G2. Buffer tube and EP/Castle is 5 oz. Rifle length gas tube 1 oz. Think that's everything.
 
Bombsquad68 said:
My guess is 7.1-7.2 lbs based off my rough AR10 parts database . Guestimate because some MFG's fudge their weights a bit and the receiver is an educated guess based on similar ones (Aero M5). And that Brigand Edge 15" rail is actually 6.3 oz in DPMS High config, 5.1 oz is the AR15 version.

The Stag 10 receiver set is going to be about 25 oz stripped, complete with grip (3 oz), forward assist + dust cover (1 oz) and Stag's 308 LPK (~7 oz) I will say around 36 oz in the complete Stag receiver.

SCS-10 Buffer from JP about 8 oz. CH is 1.5 oz . BCL stock is roughly 9 oz depending on G1 vs G2. Buffer tube and EP/Castle is 5 oz. Rifle length gas tube 1 oz. Think that's everything.
Click to expand...

Thanks.
 
CODFan said:
Lightweight .... but a BCL Gen 1 vs Stag Arms showdown is in order.

Well not really as they will both be custom rifles.
Click to expand...

Don't let that stop you! ;)
Man, I am aching to do my first build BUT i really don't need another rifle... hahah.
 
Updated with information received so far. I got out the scale and measured a couple of these parts as well [BOLD]

I hope the parts arrive quick!

Component
Weight (Oz)
BSF Barrel31.10
Stag 10 Upper/Lower Combo36
Flash Hider
2.90
JP BCG
12.96
JP Buffer8.0
Charging handle1.50
Handguard
6.30
Gas Block
0.8
Buffer Tube & Nut
5.10
NEA Buttstock
7.9
Gas Tube
1
Total113.56
7.10lbs
 
Last edited:
Hopefully since there is two importers trying to put together what people want/fighting eachother on this, That one does a min length lightweight for hunters and the other does the 30" heavy bull for those paper killing pistol mag dumps. That way everyone wins........
 
I’ve got two barrels on da way.
Faxon big gunner 6.5 CM 20 inch.
Carbon fiber wrapped ( completely) HaHa .308 20 inch.

Once I find out which one loves me the most, I’ll sell the other. :):)
 
The first day of collecting build parts .... yup kind of pathetic ... hope those parcels arrive soon!

43078958221_bd538457ae_c.jpg

43078958161_cea50edb37_c.jpg
 
Hey guys , think you could give me a hand?

I ordered the Stripped set, BGG, charging handle combo.

I got a barrel,GB/tube, Handguard ordered as well.

I have a CTR stock ,buffer tube ,spring,buffer on hand.

Am I missing anything,to get this gun functional?

Thanks

I have the necessary tools required.
 
Brianma65 said:
Hey guys , think you could give me a hand?

I ordered the Stripped set, BGG, charging handle combo.

I got a barrel,GB/tube, Handguard ordered as well.

I have a CTR stock ,buffer tube ,spring,buffer on hand.

Am I missing anything,to get this gun functional?

Thanks

I have the necessary tools required.
Click to expand...

Castle nut and endplate? Optic and mount?
 
Brianma65 said:
Hey guys , think you could give me a hand?

I ordered the Stripped set, BGG, charging handle combo.

I got a barrel,GB/tube, Handguard ordered as well.

I have a CTR stock ,buffer tube ,spring,buffer on hand.

Am I missing anything,to get this gun functional?

Thanks

I have the necessary tools required.
Click to expand...

Magazine?
 
You must log in or register to reply here.
Back
Top Bottom