Canadian legal magazine extention for the Panzer Arms speed pro.

Small batch of 30 or so ready to ship on tuesday
 

Attachments

  • 20251220_200032.jpg
    20251220_200032.jpg
    104.1 KB · Views: 34
I tried using some welding gloves to prevent any marring from the old tube. But finally had to just use the adjustable pliers into the bare metal. Heated it for well over 10m. Started to even discolour.

I also installed the no jam follower and spring. I cut approximately 16" of the spring.
 

Attachments

  • IMG_3322.jpeg
    IMG_3322.jpeg
    142.6 KB · Views: 21
Mine had no locktite on it. Had all my gear ready. Heat gun strap wrenches etc etc. for shíts and giggles when I got the barrel off I thought I’d give it a go. So grip it n rip it. Next to no effort it came apart.
Color is like 100% perfect.

IMG_6664.jpeg
 
Hey I just tried installing but I ran into an issue. It appears to be too short and wont clear the barrel. Am I crazy or did something change with the Panzer M4 speed pro I just got in the mail? The old mag tube came off by hand fyi, no heat.
 

Attachments

  • PXL_20260107_055826350.jpg
    PXL_20260107_055826350.jpg
    96.5 KB · Views: 3
Back
Top Bottom