Case head separation case removal

[EJG]

Happened to me while hunting. Cut a piece of fence wire and bent the end into a u-turn with the sharp cut of the end facing outwards. Try the bend so it fits into the remainder of the case with a little tension. When pulling out the end of the u-turn catches/wedges the brass. It worked so well I took the piece of wire home in case it happens again. I always have a Leatherman along when hunting.
edi

 

[Brassman66]

Happened to me while hunting. Cut a piece of fence wire and bent the end into a u-turn with the sharp cut of the end facing outwards. Try the bend so it fits into the remainder of the case with a little tension. When pulling out the end of the u-turn catches/wedges the brass. It worked so well I took the piece of wire home in case it happens again. I always have a Leatherman along when hunting.
edi

I can totally see how this could work on practically any Casehead separated Casing.
This is one of the most Ingenious Idea, dirt cheap and practical I ever heard off. Every Hunter hunting with a .303 Brit. should have one in his Pack.

Thanks for posting
Cheers