Corwin CZ75 mags
- Thread starter Slavex
- Start date
Thank yo everyone for the tips and such Being a newbie to this site I should have been more regard to the privacy and personal info issue
Would especially like to thank Slavex for your generousity. Sent you a pm correctly. Lol
I pledge to pay it forward oh your name my friend Thank you
Would especially like to thank Slavex for your generousity. Sent you a pm correctly. Lol
I pledge to pay it forward oh your name my friend Thank you
mikebaker1129
CGN Regular
- Location
- TEXAS, U.S.A
Those look like Tanfoglio style mags made by Sabatti.
Made it out to the range last week. Knock on wood all my Corwin mags ran without any hiccups in mt Shadow 2. I did a few mag dumps mixed in with double taps etc. I was worred about nose dives 'cause I had a couple dummy rounds nose dive on me when dry firing at home on a couple occasions. I do notice that the rounds rattle in the mags unlike the MecGar ones.
My buddy ran his Corwin mags through his Shadow 2 in the stall next to mine without any feeding issues BUT there was an issue with one of his mags with his S2. It would jam up the mag-release where you almost had to use two fingers to depress it in order to eject the mags. It was a pretty snug fit. It was repeatable if you slapped the mag into the magwell. I tried it in my S2 and it ran fine and no release issue. Sounds like his mag-release button might be on the high side. I know a couple of my Corwin mags with fitted MecGar +2 bases wouldn't lock up in his S2. I ended up swapping his mag for mine that worked normally in his S2, minus my +2 base.
My buddy ran his Corwin mags through his Shadow 2 in the stall next to mine without any feeding issues BUT there was an issue with one of his mags with his S2. It would jam up the mag-release where you almost had to use two fingers to depress it in order to eject the mags. It was a pretty snug fit. It was repeatable if you slapped the mag into the magwell. I tried it in my S2 and it ran fine and no release issue. Sounds like his mag-release button might be on the high side. I know a couple of my Corwin mags with fitted MecGar +2 bases wouldn't lock up in his S2. I ended up swapping his mag for mine that worked normally in his S2, minus my +2 base.
Thought I'd update this thread, Doing some dry fire today when one of the mags started to rattle excessively. Took it apart to find a bug chunk of the front corner of the follower had broken off, Not super thrilled since these mags have seen very light duty so far.
I figured I should probably update.
I ended up finding out how to remove the follower, and there was so much flash and sprue still remaining on it. After smoothing it all out, the mags were bunch smoother and now I figured out how to be able to fully clean mags
I had removed the spring and endplate, pushed the follower from the top until one end started to tip over, continued to flip it so it was sitting vertical. Push it past the indents and out it comes. Going in is simple as inserting it and turning up once past the indents. I can make a video if anyone is interested.
I ended up finding out how to remove the follower, and there was so much flash and sprue still remaining on it. After smoothing it all out, the mags were bunch smoother and now I figured out how to be able to fully clean mags
I had removed the spring and endplate, pushed the follower from the top until one end started to tip over, continued to flip it so it was sitting vertical. Push it past the indents and out it comes. Going in is simple as inserting it and turning up once past the indents. I can make a video if anyone is interested.
The MecGar ones rattles a little but definitely not as much as the Corwin or the 1/4 plastic factory mags.
My mecgars with +2's are silent with one round or 19 (in USA).
