Cz455 supposed to be free float ?

[Brendan91]

So I checked with a 5 $ bill and found that my barrel on my cz455 synthetic stock/stainless action is not free floating . Is this normal on these rifles or did I just get a bad one ? Asking cause I’ve noticed less acccurwcy when using a bi pod .

 

[Rodder]

I have a 455 Varmint that was fully free floated from the factory. With a bit of sanding you shouldn't have a problem opening up the barrel channel of your stock enough for it to free float.

 

[JD22-250]

My 455 synthetic is also fully free floated

 

[Rowlf]

Double checked my cz455 thumbhole and it's free floating too,

 

[Brendan91]

Dam , so for you guys you can slide a bill down the barrel with no resistance ? Looks like i have some sanding to do .

 

[Magellann]

Mine is too.

 

[silverfoxdj]

Not a big deal to get it done.. my 455 is okay from that stand point

 

[iain.quayle]

Have the same problem, has the room to be free floated but is in contact with one side of the stock. Wooden instead of synthetic

 

[Mr.Crumbz]

Stainless synthetic for me, not entirely free floated; contact on the left hand side of the stock about 4” from the receiver. Thing still shoots though!

 

[zeegler]

My walnut stock 455 is slightly tighter on one side of the barrel, but definitely free floating.

 

[sunmoong]

Checked with A4 paper, free floating.

 

[farmgunner82]

Another walnut stock free floater over here.

 

[FLHTCUI]

I have a 455 Varmint that was fully free floated from the factory. With a bit of sanding you shouldn't have a problem opening up the barrel channel of your stock enough for it to free float.

Dont forget to seal the wood once you find the sweet spot !
Rob