detachable SKS magazine in canada?

[davecasey]

ee?

Magazines are finally ready to go and are posted in EE.

where is ee?

 

[Ftaview]

where is ee?

look here - http://www.canadiangunnutz.com/forum/showthread.php?t=443999


and if you cannot access you will need to ask to get in.....

look here - http://www.canadiangunnutz.com/forum/faq.php?faq=new_faq_item#faq_cgn_exchange_rules

 

[ki11ercane]

Only black Any OD greens available?

Black only.

I was lucky to get "any." A pain and a half in the ass to get, but it's done.

 

[davecasey]

look here - http://www.canadiangunnutz.com/forum/showthread.php?t=443999



and if you cannot access you will need to ask to get in.....

look here - http://www.canadiangunnutz.com/forum/faq.php?faq=new_faq_item#faq_cgn_exchange_rules

thankyou

 

[sergey96]

Again we do have both Tapco and Metal mags pinned to 5/20 already imported to Canada.

Cheers

Al

raw deals. Do you know of any canadian websites that sell 5/20 or 5/30 mags? I just need one to complete the look of the rifle.

 

[st1264]

Just a question, the Tapco or other 5/20 or 30 round mags made for the sks fit perfectly with the tapco stock, however the wood stock would have to be modified (I read). Anyone know how to do this and does the wood stock modification make the factory 5/10 unusable afterwards?

Are the Tapco mags similar to the 858 mags in design?

 

[MIRAMICHIER]

How's it going just bought two 30 rd detachable sks mags,made by tapco good quality at wantalls good service also.

 

[computermike]

so if i have the standard 10 round hinged mag can i change to a 5/20 5/30 detachable?

What he said.

 

[hical.ca]

What he said.

Yes, just remove the steel mag & reassemble, The new mags will click right in.

 

[st1264]

Which is better (looks, durability, fit, feeding, etc), the Tapco polymer mag or the steel one?

 

[Wulf45]

Which is better (looks, durability, fit, feeding, etc), the Tapco polymer mag or the steel one?

I would like to know this as well...I have been thinking about getting a Metal Mag..do they feed well anybody have experience with using them?

 

[Gotrek]

Kevt on here had a 30 rnd steel mag and it was horrible. We both have tapco's now and no issues.

 

[westrifle_sks]

I think everyone has different review of metal mags. Also it depends what brand are those. There is 4 producers in USA alone.

Cheers

Al

 

[computermike]

I bought a 5/20 Tapco mag from Section8 and installed it last night along with a larger mag release in about 10 minutes with basic tools. I have a Norinco SKS with a fixed hinged mag. The hardest part was getting the trigger group to snap back into place but placing the rifle on a hard surface and giving it a rap with a hammer and a center punch did the trick.

I have a choate Draganov stock on the rifle and it installed with no issues. The bolt stayed locked back when I pulled the mag. Biggest hassle is releasing the mag and removing with one hand. There is an awkward two finger twist thing I saw on Youtube tthat works but is awkward not having practiced it at all.