Dlask 10/22 barrels, opinions

[Undergiver]

Are they good barrels accuracy wise ? A friend of mine had one years ago and the rifling was worn out after less than 1000 rounds.

thx

 

[Poffels]

I will have some input on one after the coming weekend.

 

[ColinD]

I got a couple. A 12.5” CF stainless, and a 16” blued.

Both are accurate, and well made. They have the sporter chamber so there are no worries if you plan on shooting stingers. I’m not sure what happened with your friends barrel, but it sounds like there might be more to it?

I would recommend them, and buy them again.

 

[m1008]

Green mountain blanks as far as I know. Sounds like a story being worn out in 1000 rounds (Norrell trigger?)

 

[infidel29]

I didn't think it was possible to wear out a 22 barrel.

 

[lone-wolf]

I didn't think it was possible to wear out a 22 barrel.

Yea, how the hell do you wear out a .22lr barrel

Maybe he liked to toss sand down the barrel, roll the bullets in diamond grit?

 

[Lee Enfield]

There are ways of burning out a .22lr barrel, but it's not easy.

Shot a bunch of tracer thru it?

Shot corrosive primed ammo and not cleaned?

 

[lone-wolf]

I'm guessing 'rifling worn out' means it was full of lead and actually fine.

 

[wallz]

I've used the carbon Dlask barrels, and will continue to in the future. Great shooting barrels, but never enough of them in stock.

 

[TheWhole9Yards]

Had a 16.5” barrel of theres in a build a few years back. 5000+ rounds without complaint or concern.

 

[Grain]

...Shot corrosive primed ammo and not cleaned?

Would have to be mighty old rimfire ammo to still be corrosive, but stranger things have happened.

I'm guessing 'rifling worn out' means it was full of lead and actually fine.

This.

 

[Sun_and_Steel_77]

I'm guessing 'rifling worn out' means it was full of lead and actually fine.

I'm with you on that.

 

[infidel29]

Only way I can really think of to wear out a 22 barrel is running thousands of externally lubed 22lr through it that you dropped in sand or dirt and didn't clean off before you fired them. That was a common issue in the old west with heeled bullets like 22 rimfire.

 

[Ridgered]

Dlask barrels excel

Dlask carbon fibre wrapped Sporter 18.5" barrel with a Tuff receiver helps make my wife's 10/22 a tack driver.

 

[Candocad]

Great barrels in terms of price and accuracy, hard to beat IMHO.

Candocad.

 

[Longstud]

All of the receivers,bolts,barrels,and muzzle brakes that I have bought and used are of excellent quality. Never had any kind of problem and have barrels with many thousand rounds that are very accurate. CANADIAN also

 

[#1bcshooter]

Only problem with Dlask 1022 barrels is finding them in stock

 

[tessy2ton]

No problems with mine. Years old.

 

[Undergiver]

Thanks for the advice guys.

 

[regulate34]

I have a Dlask .920” 16.5” stainless on my Kidd/Dlask biuld.
Shoots great with most ammo. But prefers standard velocity 40g

Shot some 50yrd 1/2” groups but usually I am around the 3/4” mark

HV hollow points are 3/4-1” @ 50yrds

I have not tried match grade ammo in it yet.

I had to warm my tuff22 receiver up to press the barrel in.
In a stock ruger receiver it was loose. For what it’s worth.

I have probably 3-4000k rounds though it. Can’t remember the last time I cleaned the barrel?