Fire breathing monster
- Thread starter alberta tactical rifle
- Start date
Got kind of worried at the end as I put 5000 aside for it but both my grandfather and I had severe problems with our trucks and had to dip into the fund but it worked out in the end.
I regret NOTHING if you want something put the cash up and get it.
Ill buy one of their reloading presses later on so I can get some proper loads for it but ill have fun with ball ammo till then.
I regret NOTHING if you want something put the cash up and get it.
Ill buy one of their reloading presses later on so I can get some proper loads for it but ill have fun with ball ammo till then.
When I get out next might be a while tho as my normal shooting area is a popular hunting location and don't want to risk a accident Please understand.So can we see a video?
boss351cleveland
CGN frequent flyer
- Location
- Down by the river
That thing must keyhole like crazy lol not that the owner cares about accuracy one bit , pure novelty gun , has no purpose at all but a noise and flame maker .
BRASSTACKS
Regular
- Location
- In the Plains of Alberta
Man that's funny and cool at the same time
Maybe do your video at dusk, to best capture the blast.
The Hank Strange/Safety Harbor video above was done under bright light, so didnt get much flame.
And if you are loading your own, try loading some black powder loads!
I'm OK with that...
So the problem with this is.......???
Some years back I had the opportunity to shoot a 10" 22-250 On a TC frame. What a frickin fireball that was!!! Think flash/bang from police training. Wow indeed!!
It's hard to become a legend and part of folklore if you are well behaved & boring!
Bring on the fireball video!!!
Cheers
Jay
Don't make me bump the "Handy camp carbine in 50 BMG" thread. (All that's missing is a bayo lug)
And for about $5000.00 too? Well done!
https://www.canadiangunnutz.com/for...ility-carbine-in-50-BMG!-Where-can-I-find-one
(All that's missing is a bayo lug)And for about $5000.00 too? Well done!
https://www.canadiangunnutz.com/for...ility-carbine-in-50-BMG!-Where-can-I-find-one
buzzmagoo
CGN Ultra frequent flyer
- Location
- sprucewood Hallows Eastern Townships
Sweet mother Meloy !! 12 inche barrel !! Mag fed!! Collapsing stock possible!!and big ass muzzle break !!BE STILL MY Palpitating Heart!!! Now down to the brass tacks ! Is there any way that theses ( yes I know only two made so far!)could be a possibility for the Canadian market ? Say an Initial run of maybe 20 or so bet ya would sell out with in a couple of days or less . Rang kits with a can of ammo( 100 rounds) ,some of that slick grease and a bore brush/jag all in at around 3 G`s would totally be Insane!! Desert Eagles step aside There be a new big dog in town !
I got a Homer Simpson bacon drool going on right now!!
I got a Homer Simpson bacon drool going on right now!!
Going for a Razor UH-1
I'd have a lot of fun reloading for that!
Regular 50BMG loads are kind of wasted on such a short barrel. IMO much of the powder won't get burnt but rather pushed out the muzzle on to the floor. 50BMG is typically made with the slowest powders available which just doesn't work in a short barrel. Still, I'd expect there to be a huge flash and minimal kick/velocity. I predict the flash likely won't be any bigger than a regular magnum pistol load, maybe less.
Look up 30-06 pistols on youtube and you'll see a similar situation. People expect huge kick but the powder typically used for 30-06 isn't designed for such a short barrel. When they actually fire it they're all like,"Oh! ok, that wasn't too bad". You'd get more boom from a max loaded .44 mag.
Regular 50BMG loads are kind of wasted on such a short barrel. IMO much of the powder won't get burnt but rather pushed out the muzzle on to the floor. 50BMG is typically made with the slowest powders available which just doesn't work in a short barrel. Still, I'd expect there to be a huge flash and minimal kick/velocity. I predict the flash likely won't be any bigger than a regular magnum pistol load, maybe less.
Look up 30-06 pistols on youtube and you'll see a similar situation. People expect huge kick but the powder typically used for 30-06 isn't designed for such a short barrel. When they actually fire it they're all like,"Oh! ok, that wasn't too bad". You'd get more boom from a max loaded .44 mag.
A little over 3 for the upper but I would like to get it modified for a ba-50 mag but I don't know if there is enough meat on the reciver wall to facilitate one but that's a long way off as Rick already said to me if it's not broke don't fix it.
I wanted a "Pistol" like the THUNDER and the PATRIOT from MGS3 but still non restricted. I wanted to get a pistol brace but I went with a RBS from M14.ca.
