First 1911...Maybe a Colt....?

Nice Colts JohnnyMac! :cool:

To the OP, I'm another +1 for holding out for a Colt if that's what you want in a 1911/1911A1....

View attachment 305284

View attachment 305285

1CanadaFlag.gif

------------------
NAA.

Thanks NAA I'm loving your Colt too, especially the grips.

I don't discriminate against most 1911's and I've owned many brands including Infinity, Baer's, Nighthawk's, a Guncrafter and STI's amongst others. Currently the only non-Colt 1911 I own is a Valtro which I would never sell and the only want I really have right now is more Colt's and maybe another Infinity. The other's can be great too but the history and the appeal of the Colt's for me is just too much to resist.

As for shooting them my Classic Colt's on a casual range day are a ton of fun. They're reliability and accuracy may surprise you. As for competition I have used a variety of different 1911's and 2011's but my current go to is this Colt SCGM in 38 super which has also been tuned by Rodger Kotanko and is easier for me to shoot than all the other's I've owned outside of an infinity and my Valtro.

bTw2ELb.jpg
 
Last edited:
I have a norinco 1911a1 that i got to try and i love it. Its more accurate than me and has many modern feature that you would expect from a 1200$+ 1911. For a first 1911 if you are not sure to love it at 350 bucks they are a good value IMHO
 
I have a norinco 1911a1 that i got to try and i love it. Its more accurate than me and has many modern feature that you would expect from a 1200$+ 1911. For a first 1911 if you are not sure to love it at 350 bucks they are a good value IMHO

I've also had good success with Norinco 1911's over the years, too. :)

DSCN5450.jpg

1CanadaFlag.gif

------------------
NAA.
 

Attachments

  • DSCN5450.jpg
    DSCN5450.jpg
    96.6 KB · Views: 257
That one of mine ,I bought from some one here listed on the EE and thought the price was very good , less than the gunsmithing bill he said, and I believe that.
Kart match barrel, EGw ignition and trigger, Rest is Ed Brown match stuff, and trigger job 10/8 Novak sights , grips, 40lpi checkering job on the frame, the best I have seen.
Only Norc. parts are the bare frame and slide. O play in the slide. I have not shot a huge amount with it, but lots of reloads, O problem.
No marking at all, just serial.
Even stock one I have handled have been quite good, the fit and finish is better than a few yrs ago, I think.
I handled quite a few DA 1911 commanders and those all shot great, But no stock left .
 
I bought a very used Series 70 Colt for 600 bucks. When it needs a part it gets one from the Wilson Combat catalog. I personally have no complaints and that pony on the side of it makes me very happy.
 
Well....after an expensive search taking over a year, I finally found a minty 1992 M1991A1 completely stock!
Slide is tight and smooth. Nice black rubber COLT factory grips.
Looking forward to enjoying my first 1911 experience at the range soon!
Thanks all for the kind and detailed feedback!
Cheeeeeeers!:cheers:
 
Well....after an expensive search taking over a year, I finally found a minty 1992 M1991A1 completely stock!
Slide is tight and smooth. Nice black rubber COLT factory grips.
Looking forward to enjoying my first 1911 experience at the range soon!
Thanks all for the kind and detailed feedback!
Cheeeeeeers!:cheers:

Prediction: After your first range session with a 1911, you'll have a hard time enjoying a Glock .45 again.:)
 
The colt I have and had we’re flawless in function including all sorts of hollow points, are much more accurate than I am . Even though I have a couple CZ 75, a shadow line and shadow 2, there’s just something about a 1911 with pony on the side.
 
A 1911 can vary from a work of art to a rattly piece of crap and anything in between. The Series 70 Colts are prized because they don’t have the firing pin safety that supposedly ruins the trigger. I’ve never noticed a real difference. The old Colt bluing is very nice if you can find a pristine example. The Series 70 is around 50 yrs old after all. The stock sights are a little small compared to your modern Glock.

They are comfortable to shoot all day unless you have big beefy hands and you buy one with a spur hammer and the old, non- beaver tail grip safety. You must also remember to really take a good, high grip. If you don’t grip a 1911 properly and squeeze down on the grip safety, the gun won’t fire.

The take down and reassembly is my biggest gripe compared to a Glock. It is slower and can be frustrating. You also need to watch out for the famous “ idiot scratch” from reassembling the slide stop. YouTube is your friend.

The 1911 is renown for its grip angle. Some call it the perfect angle for a handgun. It also has the easiest trigger press as the trigger just goes straight back. However, they are quite gritty and heavy from the factory. Almost like a Glock but... different!

I find them finicky and not as reliable as the Glock. Ive never seen one go thru a competition without some kind of problem. But, boy, is a well tuned one a pleasure to shoot. They can be amazingly accurate and when properly tuned, the trigger is amazing.

Things I would change on a stock 1911 to make it feel better are:
Trigger job, throat the barrel and polish the feed ramp.
Good magazines ( very important!)
Change the sights. I like the Novak style and they look sharp on the gun.
Get an extended thumb safety ( ambi, if you want).
Change the hammer to a ring or Commander style.
Get a good beaver tail grip safety, then de-activate it!
You might want to flare the mag well or get a custom magwell which will make it easier on quick mag changes.

You will find that if you buy a stock Series 70 and do all the above work to it, you will have spent a lot of money and should maybe just buy a modern version instead! There’s a reason why 1911 collectors have so many of them!

I like your list of mods for the 1911. Most specifically, the "Get a good beaver tail grip safety, then de-activate it!" When we wrote up the Mexican IPSC/Practical Shooting rules back around a decade ago or more, somewhere in them is a line that says that 1911's with de-activated grip safeties are permitted. Why worry about a rule written to satisfy the compulsive need to protect one's backside from civil-liability-lawsuits when there are no civil-liability-lawsuits?
 
Well, this thread got me itching to go shooting. Been a while since I was at the range, so tomorrow I'm taking out a couple of neglected Colts. Got a pile of Super .38 to burn, gonna see what these pistolas can do. The ratty looking one is a purchase from a few years ago, never fired it. Always tried to take care of it and figured I would let it enjoy its retirement. The newer one is what I bought when I need to scratch the .38 itch after buying the first.

See how it goes, at least I'll be able to say I shot it before they tried to take it away (not like one or two others in turmoil right now).

rKe8lvE.jpg


LeXxDY7.jpg


Next time might be my modest collection of old USGI a1's, just cuz.
 
I have a 1991A1 in subdued stainless finish with the kind of ugly plastic trigger. Of course it's series 80.
But you know what? It works just fine. So what I replaced the original factory magazine. What pistol owner has not done this at one time? I bought a mit full of NIB ex-GI mags from this EE and this pistol runs like a champ. Unfortunately any American made 1911 with a light rail they ask too much for it in my own opinion. Colt and Sprfields as high priced examples. ($2500+)
If I were you I would look hard at a used Colt series 80 without the light/laser rail.
If you insist on a rail maybe go Dan Wesson but seriously have a good hard at the Armscor 1911 as a brand new purchase.
Taylors and Company (cowboy firearms) picked up importing Armscor 1911 pistol.
They must of done this for a very good reason.

Good luck in your 1911 quest.
 
Last edited:
So many experts have commented here I'll add a word from a 1911 novice who has just one. After trying a few I settled on a Springfield Range Officer. Very pleased with it. Adjustable target sights for me are a must, since my goal is to make my own Bullseye loads for shooting slow at 25 yards (as I'm doing with my K38). This 1911 is a 45 of course. I find 45 easier to shoot than 9mm -- a bit more recoil but not so sharp.
 
So many experts have commented here I'll add a word from a 1911 novice who has just one. After trying a few I settled on a Springfield Range Officer. Very pleased with it. Adjustable target sights for me are a must, since my goal is to make my own Bullseye loads for shooting slow at 25 yards (as I'm doing with my K38). This 1911 is a 45 of course. I find 45 easier to shoot than 9mm -- a bit more recoil but not so sharp.

Just my experience (take it for what its worth) but a Springfield is as good as any out of the box production-line 1911 gets. I'm no expert though, just an enthusiast....

WnokA94.jpg
 
I have a norinco 1911a1 that i got to try and i love it. Its more accurate than me and has many modern feature that you would expect from a 1200$+ 1911. For a first 1911 if you are not sure to love it at 350 bucks they are a good value IMHO

Agree 100%. Got two. As well as a Para Ordinance Black Ops. No issues with any of them.
 
Well....after an expensive search taking over a year, I finally found a minty 1992 M1991A1 completely stock!
Slide is tight and smooth. Nice black rubber COLT factory grips.
Looking forward to enjoying my first 1911 experience at the range soon!
Thanks all for the kind and detailed feedback!
Cheeeeeeers!:cheers:

Well today I finally made it to the range with my new (to me) 1992 built, M1991A1 COLT 1911 and my 13 year old GLOCK 21SF which I have shot for a couple of years.....and I found the COLT to be naturally more accurate compared to trying harder with poorer results with two years experience with my GLOCK. I will conclude that the 21SF was considerably softer in recoil compared to the 28 year old COLT, but noticeable was all I would conclude.

Thanks to this forum and the many fine members I am now in enjoyment of a fine COLT 1911~!
 
Back
Top Bottom