Franken-Pinned sks weld broke

[rob350]

So lets say the weld that holds the 5 round pin in place on a Franken-Pinned sks broke, whats some options for repinning/fixing it?

 

[GQBalla]

take the magazine off and getting it welded back in.

 

[dahs]

Whatever you do, DO NOT use this as an opportunity to shoot an unneutered rifle. Think of the children!

 

[.30/06 FTW]

Better fix it quickly or multiple baby kittens will die!

 

[supernova]

The antis are killing innocent women and children to prove that assault clips kill people so better reweld it before they do more damage to this country.

 

[mwjones]

You should probably take it to the police station and turn yourself in for having a prohibited device. Then a criminal gets put behind bars, and another gun goes on the pile for the "look at all the guns we GOT OFF THE STREETS" photo op.

OR you could weld/solder/screw/epoxy it back on.

 

[liberal-hater]

So lets say the weld that holds the 5 round pin in place on a Franken-Pinned sks broke, whats some options for repinning/fixing it?

Bonus! Now it will work properly, the way it was intended!

But if you for some reason want to re-damage it again, a drop of epoxy would do it.

 

[Cgn99]

Jb weld, or $25 buck on new mag for it, or $39 buck for a tapco 5/20 detachable mag

 

[OC-3]

 

[Unagi604]

place skittles at the bottom of the mag until it only holds 5 again

 

[Camaroguy]

place skittles at the bottom of the mag until it only holds 5 again

Yeah! That way if you're ever stranded with your rifle, you have a snack.

 

[LordEvilPepper]

Oh GOD! destroy the rifle now! with the mag unpinned it will undoubtedly compel you to go on a mass shooting, and even if you resist it will grow legs and do it on it's own!

but seriously... get it rewelded... I work at a welding shop, I can do it for free if you drop it off next time you role through edmonton.
PM me if that works for you.

 

[XCR User]

Just stuff a stick in it as long as it only holds 5 rounds your good to go.

XCR User

 

[Magellann]

Either reweld it, or buy a new mag for it. You could also use a rivet to hold the spacer in place.

 

[KeltecFan]

So lets say the weld that holds the 5 round pin in place on a Franken-Pinned sks broke, whats some options for repinning/fixing it?

Recent SKS rifles that came from Westrifle were pinned to the follower instead of the Frankenpin. I guess adding a second method of frigging it up isn't a good option. JB Weld is what I would use in this case.

 

[mcmack]

Try placing 5 rounds in the bottom of the detachable mag, wait 3 minutes. Put the gun down, spin around twice, look toward the east, count to 10. Pick up the SKS. Now it will hold 5 rounds so go ahead and load it up!!

 

[savagefan]

Replace it with a stud so you could unscrew the bumper to do a thorough cleaning.

 

[turbo_bird]

I used a pop rivet and a short piece of tubing in mine.
Kristian

 

[TRaTSeRiF]

I used a pop rivet and a short piece of tubing in mine.
Kristian

We have a winner and I would have posted something along those lines had you not. Good enough to meet the legal requirements, easy enough to remove should shtf or the laws be brought back to normal.

 

[westrifle_sks]

You can buy a magazine from us.

Al