Grand Power BLOWOUT !
- Thread starter Dlask Arms
- Start date
ambishooter
CGN frequent flyer
- Location
- Southeastern Canuckstan
All out now....
Dlask is super quick, got mine today exactly one week after placing the order, and this was even after I called in to have something added to the order after it was placed. Now comes the hard part waiting for the CFO and the registration cert.
I got my K22-Xtrim yesterday too, and they also forgot to put in the extra mags I ordered. They weren't answering their phones yesterday, so sent them an email. Hopefully hear from them on Wednesday.
Oh, and if you are going to change your mag disconnect so the big button is on the right, it's really easy. Just push out the mag release bar from the small dia side, you can then insert the mag release bar from the other side so the big dia button is on the right - it should slide in ~1/3 of the way before you hit the magazine catch. With the slide off, just reach in the top of the mag well, and push down the magazine catch that sticks up (the part that actually catches and retains your mag), this will pivot the mag catch out of the way and let you slide the mag release bar in the rest of the way (keep the v notch facing into the mag well). You do not need to take out the magazine catch pin. Getting that magazine catch spring and magazine catch lined up and reinstalled is really tricky - even using temporary alignment pins. I found that out the hard way yesterday lol
Oh, and if you are going to change your mag disconnect so the big button is on the right, it's really easy. Just push out the mag release bar from the small dia side, you can then insert the mag release bar from the other side so the big dia button is on the right - it should slide in ~1/3 of the way before you hit the magazine catch. With the slide off, just reach in the top of the mag well, and push down the magazine catch that sticks up (the part that actually catches and retains your mag), this will pivot the mag catch out of the way and let you slide the mag release bar in the rest of the way (keep the v notch facing into the mag well). You do not need to take out the magazine catch pin. Getting that magazine catch spring and magazine catch lined up and reinstalled is really tricky - even using temporary alignment pins. I found that out the hard way yesterday lol
smokeater40
CGN Regular
- Location
- Southern, Ontario
Don't see on web site anymore.......are they sold out?
My X-trim showed up today.... and first impression; AWESOME.
I have itty-bitty hands, so if/when smaller backstraps become available I will gladly pick up a smaller set and it should fit even better for me.
Took my MP9 magazine holster and just tightened it up a bit and the grand powers fit it nicely. Now for a holster and I am ready to go on the next CQB match! No more having to physically draw my magazine out like on the Browning High Power Ive been using!
Fiber optic sight is great, and the mag release is a good size, so its hard to miss! Again, complaint about my hand and not the actual gun; hopefully I can get and extended slide release made up to fit my midget hands.
I have itty-bitty hands, so if/when smaller backstraps become available I will gladly pick up a smaller set and it should fit even better for me.
Took my MP9 magazine holster and just tightened it up a bit and the grand powers fit it nicely. Now for a holster and I am ready to go on the next CQB match! No more having to physically draw my magazine out like on the Browning High Power Ive been using!
Fiber optic sight is great, and the mag release is a good size, so its hard to miss! Again, complaint about my hand and not the actual gun; hopefully I can get and extended slide release made up to fit my midget hands.
