Henry's PCC -yes it takes glock mags
- Thread starter lone-wolf
- Start date
- Location
- ON, North of GTA
Even if you go with some of the extra-high-velocity options like Velocitors or Stingers, you're still only getting up to like 180-200ft/lb energy...
- Location
- Alberta, North America
Nah gadget
- Location
- ON, North of GTA
I shoot both, plenty.
Hardly even knock a gong off the hanger with a 22lr, pretty common occurrence though with 9mm.
Kinda sorta. Even .45 and especially 10mm blowback PCCs need a pretty heavy bolt mass in order to adequately retard the opening of the breech during the firing cycle. Then you need a gigahuge spring to prevent said bolt weight from rocketing into the rear of the receiver. Wish we could get the new stribog up here. 10mm in roller-delayed blowback? Match made in heaven!
As bnk2 says, its not a matter of tough to make, its a matter of tough to make one that people will actually be able to use or want to use. You can make a 50bmg as a blowback gun if you put enough weight in the breech block and a heavy enough spring behind it. You'll never be able to #### it by hand though. Even some 9mm PCCs - keltec Sub2000 comes to mind - are known to be on the hard side to cycle, enough so that some ladies and youth have difficulties and there are larger aftermarket handles available to help deal with the issue.
The biggest blowback I know of is the 20mm Orlikon. But you use the WHOLE GUN as a big lever to #### it.
ccccccccccccccc
Last edited:
cccccccccccccccc
Last edited:
