high end scope for close in/long range

[marlin60]

I know BR and close quarter shooting are opposites, but is there a scope that would be useful under a hundred yards for fast target aquisition, but still give magnification and adjustments to 600 yds.

It is for a 6.8 AR15.

 

[koalorka]

How much are you looking to spend? If it's anywhere near 2-3k then the Schmidt & Bender ShortDot is the best there is.

 

[ian_in_vic]

Slightly cheaper would be the US Optics SN4. Multiple reticles and options are available, basically they make them to order within parameters for the model. Both scopes are a 1-4x.

 

[Sosa]

Leupold Mk4 1.5 to 5 should work, and you can order different reticles. It's around $1000

 

[9mm-Suppository]

i hope to get me one of these at some point: http://www.valdada.com/vn/ior/03k

 

[APG]

Depending on how your scope will be mounted, you may want to consider buying two separate scopes.
If you have quick release type rings, it will only take a few minutes to changes scopes. Also, it might actually be cheaper to buy a specialized scope for each job than an expensive scope that will do both.
For close in work, a small lightweight scope would work best. At less than 100 yards, you would want less than 4X magnification. In fact, 1X sights such as the EOTech might do the job.
For 600 yards, you would need a scope that would go to 12X or more magnification. Such scopes are usually large and heavy.
You may get more answers to your question on the Optics forum.
APG

 

[Wendell]

Depending on how your scope will be mounted, you may want to consider buying two separate scopes.
If you have quick release type rings, it will only take a few minutes to changes scopes. Also, it might actually be cheaper to buy a specialized scope for each job than an expensive scope that will do both.
For close in work, a small lightweight scope would work best. At less than 100 yards, you would want less than 4X magnification. In fact, 1X sights such as the EOTech might do the job.
For 600 yards, you would need a scope that would go to 12X or more magnification. Such scopes are usually large and heavy.
You may get more answers to your question on the Optics forum.
APG

Two might be better than one.

(This was posted by CGN roberti11. http://www.canadiangunnutz.com/forum/showthread.php?t=193870)

 

[w squared]

Elcan Spectre DR.

It switches between 4X and 1X with the flip of a switch.

It's not for everyone, but it's an option.

 

[Mike K]

The Millet 1-4x scopes are pretty popular and do not break the bank.

 

[icedragonmx]

Nightforce 2.5x10x24NXS on a LaRue mount with a Dr Optic on the side? Just an idea for close and far in a combo deal

 

[smak_daddy]

with mt TA31F acog I can quickly target as close as 10 feet when using the BAC method.

With the 4x its pretty darn good out to 300ish yards.

 

[JFP]

I'm thinking of getting a high quality shotgun scope for may carbine rifle. These scopes usually have a wider field of view then the norm and fairly long eye relief(3.5-4.5")........ making such scopes good for short range, quick target acquisition....... good optics for hunting in heavy bush.

 

[KevinB]

S&B Short Dot -- IIRC retail is somwhere near $2400 from Wolverine
(I dont pay retail)

Of all the scopes listed its the only reasonable choice.

The new Aimpoint mount for the X3 magnifier makes that a more realistic option now as well...