Holes in empty cartridge?

[uberti77]

what is causing this?

 

[jeffreyguy]

file not found

 

[uberti77]

Photo bucket is not doing it ...

 

[flyr]

Any chance there is a scope mount screw hole in the receiver that has been drilled right through to the chamber?

 

[uberti77]

Any chance there is a scope mount screw hole in the receiver that has been drilled right through to the chamber?

No visible hole from rhe outside...

 

[greywolf67nt]

Try imgur for photo uploads

 

[uberti77]

Try imgur for photo uploads

I will cause flickr isn't better... Give me a second.

 

[kamlooky]

The photo slipped thru a hole in the bucket.

 

[uberti77]

I will cause flickr isn't better... Give me a second.

I give up... I can't put a direct picture.

 

[Paul_T]

https://imgur.com/gallery/QvPUU

 

[Paul_T]

You need to copy the BBCode

 

[OkayShooter]

A pit in your chamber?

 

[Paul_T]

A pit in your chamber?

Did someone drill a hole for mounting something and go through into the chamber?

 

[uberti77]

 

[uberti77]

Yess! How did you do that?

 

[uberti77]

Did someone drill a hole for mounting something and go through into the chamber?

I think the barrel had a different action at one point...

 

[kodiakjack]

Cool.

Does this happen every time? Can you tell if it’s on the top of the shell? Can you probe around in the chamber with a tooth pick or a little piece of wire to see if there’s a void in there? Can you post a pick of the chamber and action?

It sure looks like a sight was mounted, and the hole was drilled to deep (either right through, or almost right through, and it finally gave way.) and the brass is blowing out into the hole. If that’s the case, it’d probably be super hard to extract...

 

[uberti77]

 

[uberti77]

I did it ! Thanks for the help. I called my brother to ask him what he did . He told me that it was a different action at the beginning... Probably a hole from a scope mount. Thanks guys.

 

[uberti77]

Cool.

Does this happen every time? Can you tell if it’s on the top of the shell? Can you probe around in the chamber with a tooth pick or a little piece of wire to see if there’s a void in there? Can you post a pick of the chamber and action?

It sure looks like a sight was mounted, and the hole was drilled to deep (either right through, or almost right through, and it finally gave way.) and the brass is blowing out into the hole. If that’s the case, it’d probably be super hard to extract...

It extracted fine but and shoots ok but when i looked at the empty ones i was concern.