I need some help from the big dogs regarding reloading

[Brno8x57]

A new question that I should have asked earlier. When only collar sizing the .303 brass, do I wind down the primer pusher on my original die or would you recommend a separate primer remover or a separate collar only die?
Thanks.

I bought a Neck Size Only die for my 303. Made by RCBS. I am sure you can adjust your FL resize die so that only the neck portion of the case gets re-sized. As long as the de-capping pin (primer pusher pin??) extends throught the flash hole far enough to push the primer out, you should be OK. If it doesn't, then, yes, thread the de-capping rod assembly down until the pin pushes the primer out.

 

[reloader]

Yes your RSO is FOS maybe someone should shake his head to see how full it is?

 

[Ganderite]

I bought a Neck Size Only die for my 303. Made by RCBS. I am sure you can adjust your FL resize die so that only the neck portion of the case gets re-sized. As long as the de-capping pin (primer pusher pin??) extends throught the flash hole far enough to push the primer out, you should be OK. If it doesn't, then, yes, thread the de-capping rod assembly down until the pin pushes the primer out.

If you use the FL die to neck size, screw the decapper rod down a bit further, so it still works.

 

[crazy_davey]

The RSO sees my swearing to the Gods and after finding out that these are reloads he picks and couple up and shakes them. He said, if you can hear the powder move inside the bullets NFG. He went on the explain that with room in the casing the force of the powder can blow back and do what it did to my rifle.

The RSO sounds like sunray...