Ideas for Dominion Arms

[CanAm]

it is possible, but far from easy.

 

[Takujualuk]

Isn't it possible to make the drawings using a M6 scout in hand? To reverse engineer this would not be hard or expensive. Many of us here have been wanting this little combo gun for a while. So there is a demand.

I already own 2. I would by 2 more in a second, especially if offered in different ga/caliber combos. Like .410/.22lr, .410/.22hornet like the originals, and maybe a 20ga/.22-250 or a 28ga/.223?

I think a 357 Mag-410 and a 25-20-410 would be the way to go

 

[danadog]

25-20? That's pretty hard to find!

I think a 357 Mag-410 and a 25-20-410 would be the way to go

 

[DWDMOWAT]

they do make a 300 mag and 12 gauge. comes from germany

 

[Deckard]

Rename this thread: The answer is No! Unless you give me the plans.

This is not about ideas, but free plans for the reputed reverse engineers. LOL

 

[Can-down]

it is possible, but far from easy.

That's also a good new name for the thread!

 

[brutus279]

Just dreaming....
(Stock got to be immobilized in order to stay non-restricted)
A vertical fore-grip may be a cool addition too...

 

[McCoy]

Yes they would be restricted, but i would buy them anyway.
Double barrel 20 gauge:

Double barrel 12 ga:

.

 

[Robert22]

If it's allowed, how about a new run of the "Valmet Hunter", I believe it's an exception on the Prohib list. Would a new production copy also be? I bet it would sell like SKS's if it was priced right and made well!

 

[SCDL]

If it's allowed, how about a new run of the "Valmet Hunter", I believe it's an exception on the Prohib list. Would a new production copy also be? I bet it would sell like SKS's if it was priced right and made well!

Not the first time someone had that idea. It's a no-go, unfortunately. It has to be manufactured BY Valmet for it to be a Valmet, and they closed up shop ages ago.

 

[cadgo]

SKS handgun with 10 round magazines.....

 

[ton45-II]

I have one...

A bolt action 45 ACP rifle that uses 1911 mags. It should have a max barrel length of 16.5", shorter if possible. Almost like the Delisle rifle but with out the suppressor.

Whatcha think?

 

[Can-down]

I have one...

A bolt action 45 ACP rifle that uses 1911 mags. It should have a max barrel length of 16.5", shorter if possible. Almost like the Delisle rifle but with out the suppressor.

Whatcha think?

I think you need to talk with juanvaldez about a lee enfield .45acp mag conversion and barrel....

 

[ChromeArty]

I'm just wondering why the 2nd idea would be a ''not a chance'' like scenario?

 

[ChromeArty]

oh wait 66 pages! I'm sure this question has been answered nevermind!

 

[Deckard]

Say it! You might get a "get me the drawings" response. LOL.

 

[fat tony]

Import 65,000,000 Bushnell TRS-25's and sell them for Walmart like prices, limit of say 3 per customer.

 

[Splatter]

I have one...

A bolt action 45 ACP rifle that uses 1911 mags. It should have a max barrel length of 16.5", shorter if possible. Almost like the Delisle rifle but with out the suppressor.

Whatcha think?

I like it; but why not a pump or lever action rifle that takes the 1911 mags? you still get the locked breach of the bolt, and you get faster follow-up shots.

And hopefully a Brewer-type barrel nut so we can change barrels easily.
Because I can see the beauty of a super short carbine with a 16" or even a 12" barrel in .45 ACP; but I think that personally, I'd prefer the pointing and ballistic characteristics of a 20" or even a 24" barrel.

 

[Robert22]

Not the first time someone had that idea. It's a no-go, unfortunately. It has to be manufactured BY Valmet for it to be a Valmet, and they closed up shop ages ago.

Aw... shucks

 

[Splatter]

Not the first time someone had that idea. It's a no-go, unfortunately. It has to be manufactured BY Valmet for it to be a Valmet, and they closed up shop ages ago.

So the name "Valmet" would be available for a company to use?