IDF M14 parts kits picture thread!

Got my kit today and am super happy with it! And its awesome to say that it is mostly H&R!!

fNz4yc6.jpg


Break down :

Barrel : H&R
Op rod : H&R
Gas Tube : H&R
Trigger Housing : H&R
Safety : H&R
Rear Sight Base : H&R
Windage Knob : WCE
Elevation Drum : WCE
Bolt : TRW
Hammer : TRW.

This will make so a sweet rifle, The pic I posted earlier was of another completed H&R build, Its going to be awesome to have 2 H&R's!!

On an interesting side note, of the Israeli electro penciled #'s only a few match each other. I will be up for doing trades on the TRW parts for H&R parts in a few weeks.
 
Kit came in today!! Boy was I a ball of nerves waiting for it, never know what it's going to have or shape it will be in. Stock is very nice and will not be touched. Heavy kit General dynamics barrel hrt bolt trw trigger group sa op rod. The barrel looks new!! Clean sharp rifling!! I am lucky and very happy!! These kits sold out right away, by the time I got ahold of sales they where gone. I purchased a std kit then got a call back someone canceled there order so I got it!! What luck. LRB receiver for this one.
 
Last edited:
got mine! Standard package with:
TRW Barrel 7790190 1 63 BC
TRW Bolt
HR Trigger
OMB1 Rear Site
OP Rod ### out, Winchester?
Stock is pretty beat up and brought a bit of the desert with it.FullSizeRender (33).jpgFullSizeRender (34).jpgFullSizeRender (35).jpg
 

Attachments

  • FullSizeRender (33).jpg
    FullSizeRender (33).jpg
    19.8 KB · Views: 423
  • FullSizeRender (34).jpg
    FullSizeRender (34).jpg
    52.1 KB · Views: 419
  • FullSizeRender (35).jpg
    FullSizeRender (35).jpg
    38.5 KB · Views: 417
Got a complete H and R setup. Barrel, bolt, trigger assembly, rear sight base and op rod. No markings on gas assembly.

Barrel looks good. How do H&R barrels stand up accuracy wise?
 
cigar_man said:
You can say that again.

I don't think I have seen you since back then at the Bingo Hall Gun shows.

I still hang out with an old buddy of yours I think, Ron D from Toronto.


I used to wade through 45 gallon drums of M-14 surplus parts at Camp Perry on commercial row.

In particular, a U.S. Veteran from the Vietnam War that I knew had a setup on commercial row with hundreds of stocks and drums of parts.

His wife, a Vietnam War Bride did all the deals.

Man, I feel OLD now!

Thanks John @ m14medic.ca, great work and information.

I only bought one, but you have my wheels spinning again.
Click to expand...

The bingo hall gun shows, I take it your referring to the shows that used to be on Jane street back in the day? Seems just like yesterday. That's were I bought my first M14.
 
The bingo hall gun shows, I take it your referring to the shows that used to be on Jane street back in the day? Seems just like yesterday. That's were I bought my first M14.
Click to expand...

Yes Sir, that was the place to be.

That gun show and these M-14's are like a box of chocolates. You never know what you're gonna get.

Mine arrived today:

SAK medium barrel 09-83 and stamped NM on the top of barrel before the front sight
HRA op-rod
TRW bolt
Winchester trigger housing with TRW hammer

All main components seem to be electro penciled with matching 3 digit numbers

Stinkin mint shape
 
Last edited:
So I have one SAK barrel and one I can't find numbers on. Both are the heavy barrel kits. One with a trw bolt and op rod, the other I have to go look up the numbers. Some HR trigger parts.
 
These sure are great kits! All parts are in very good condition and are suitable for reparkarization:

Parts Kit # 1 - HRA

hra1.jpg


hra2.jpg


Three confirmed kills!

hra3.jpg


HRA Barrel
HRA Bolt
Winchester Operating Rod
HRA Trigger (Complete)
HRA Rear Sight
HRA Gas Assembly

Parts Kit # 2 - Winchester

winchester1.jpg


winchester2.jpg


winchester3.jpg


Winchester Barrel
Winchester Bolt
Winchester Operating Rod
Winchester Trigger Housing & Safety
HRA Hammer
Winchester Rear Sight
Winchester Gas Assembly

Parts Kit # 3 - Springfield Armory

springfieldarmory1.jpg


springfieldarmory2.jpg


springfieldarmory3.jpg


springfieldarmory4.jpg


HRA Barrel
Springfield Armory Bolt
Springfield Armory Operating Rod
Springfield Armory Hammer & Safety
HRA Trigger Housing
Springfield Armory Rear Sight
Springfield Armory Gas Assembly
Springfield Armory Walnut Stock With Hardware

Having now seen these in person, I wouldn't be as concerned keeping the parts sorted by their electro penciling given that some parts have more than one number on them. I bought a few kits hoping to get the specific parts I'm looking for to use in a future Springfield Armory build, and ended up being able to put together one each of almost entirely matching HRA, Springfield Armory, and Winchester parts kits which are listed on the E.E. now at my cost. I'm hopeful I can sell these quickly enough to pick up another handful of kits to restart the process.
 
Barrel : SAK MFR 26978 9345206 9-82 82472 marked NM 364
Op rod :HHA 385
Trigger Housing : H&R 283
Trigger hammer : H&R
Rear Sight Base : H&R
Windage Knob : Lufkin
Elevation Drum : WCE
Bolt : TRW 385
Stock : 387
2017-01-30%2016.27.09_zpswjlyiqqa.jpg


the stock is a butchered pile of crap. worst one i have seen yet. deep gouges every where. has had a repair near the serial number and i thinl the end that goes to the gas tube has been "glued" back together.

2017-01-30%2016.27.20_zpsxgd00scx.jpg


2017-01-30%2016.27.51_zpsnl8jvmsa.jpg


this gun must have fallen on the floor and got mixed up with other kits. only two parts that match are the bolt and op rod. i doubt any of these pieces knew each other before getting tossed in the same bag. at least the barrel looks great and the parts appear serviceable.

just noticed that the barrel was clamped in a vise on the gas block and then on the barrel itself farther down.... oh well
 
Last edited:
Sh0ckw4v3 said:
These sure are great kits! All parts are in very good condition and are suitable for reparkarization:

Parts Kit # 1 - HRA

hra1.jpg


hra2.jpg


Three confirmed kills!

hra3.jpg


HRA Barrel
HRA Bolt
Winchester Operating Rod
HRA Trigger (Complete)
HRA Rear Sight
HRA Gas Assembly

Parts Kit # 2 - Winchester

winchester1.jpg


winchester2.jpg


winchester3.jpg


Winchester Barrel
Winchester Bolt
Winchester Operating Rod
Winchester Trigger Housing & Safety
HRA Hammer
Winchester Rear Sight
Winchester Gas Assembly

Parts Kit # 3 - Springfield Armory

springfieldarmory1.jpg


springfieldarmory2.jpg


springfieldarmory3.jpg


springfieldarmory4.jpg


HRA Barrel
Springfield Armory Bolt
Springfield Armory Operating Rod
Springfield Armory Hammer & Safety
HRA Trigger Housing
Springfield Armory Rear Sight
Springfield Armory Gas Assembly
Springfield Armory Walnut Stock With Hardware

Having now seen these in person, I wouldn't be as concerned keeping the parts sorted by their electro penciling given that some parts have more than one number on them. I bought a few kits hoping to get the specific parts I'm looking for to use in a future Springfield Armory build, and ended up being able to put together one each of almost entirely matching HRA, Springfield Armory, and Winchester parts kits which are listed on the E.E. now at my cost. I'm hopeful I can sell these quickly enough to pick up another handful of kits to restart the process.
Click to expand...

One of your parts kits came with a walnut stock?
 
raindog said:
Another missing rear sight code for the windage knob; Wright

You might consider a "none" category for trigger parts and sight codes as well - unmarked small parts are common.
Click to expand...

I added those in, Thanks,
Here is the link for anyone that has not yet added their rifles to the database https://goo.gl/forms/RtwhMGBIVVcm3rTO2

7jHfIU3.jpg

MY HB kit so far ,

Barrel - SAK
BOLT - TRW
OP ROD - HR
Trigger group - HR
Stock - So So

This example shows hard stamp matching Bolt, Op Rod, Barrel and muzzle brake "451"
 
You must log in or register to reply here.
Back
Top Bottom