last time I was in jail they had that all in one stainless toilet with the sink on top.... I thought it was pretty cool, it would even be more cool made from billet aluminium.... anodized red of course
Is there a need for more Cdn made AR parts?
- Thread starter alberta tactical rifle
- Start date
last time I was in jail they had that all in one stainless toilet with the sink on top.... I thought it was pretty cool, it would even be more cool made from billet aluminium.... anodized red of course
What is the Lambda for?
How about some ideas on how to properly colour in the letters and engravings.
Very pleased with the Lower.
No Machine marks - unlike another custom lower
I asked for a 6 digit serial # - it ended up right on the edge and looks off-center - Could it have been centered? I picked it though...
The Eagle is out of this world.......
Last point, the coating is a little thin towards the back of the lower. The shiny areas are the thin areas. It is the same on both sides of the lower.
Overall it is what I had expected from a custom lower
One thing I forgot that was included is the anti-wiggle pin in the lower...very cool.
No Machine marks - unlike another custom lower
I asked for a 6 digit serial # - it ended up right on the edge and looks off-center - Could it have been centered? I picked it though...
The Eagle is out of this world.......
Last point, the coating is a little thin towards the back of the lower. The shiny areas are the thin areas. It is the same on both sides of the lower.
Overall it is what I had expected from a custom lower
One thing I forgot that was included is the anti-wiggle pin in the lower...very cool.
Last edited:
Yeah, sorry about that - originally we were only going to go with 4 digit serial numbers, so all of the engraving except for the number was already done at the time of machining that side of the lower, then at the very end they were put in to do the serializing once we had the final list.
Glad you like the eagle, Deutschland uber alles!
Nice engraving and photos rivet.
The only issue I have with mine the the thickness of the left side pivot pin housing. The pin sits flush with the edge, instead of it being thinner and the pin protruding slightly on a forged lower. I find it more difficult to pop the pin out to swap uppers. It looks better this way though.
The only issue I have with mine the the thickness of the left side pivot pin housing. The pin sits flush with the edge, instead of it being thinner and the pin protruding slightly on a forged lower. I find it more difficult to pop the pin out to swap uppers. It looks better this way though.
Eventually when my 3 year old is old enough he will have an AR with his Birthdate as the serial number. I think that is worth the price of admission alone. (and the Eagle)
Who has a tip on colouring an engraving?
I have a couple AR-10 LPKs... most of those parts work.... (I think)
(and the Eagle)Who has a tip on colouring an engraving?
I have a couple AR-10 LPKs... most of those parts work.... (I think)
- Location
- 54°52'56"N 112°10'7"W Alpha Bravo
Very pleased with the Lower.
No Machine marks - unlike another custom lower
I asked for a 6 digit serial # - it ended up right on the edge and looks off-center - Could it have been centered? I picked it though...
The Eagle is out of this world.......
Last point, the coating is a little thin towards the back of the lower. The shiny areas are the thin areas. It is the same on both sides of the lower.
Overall it is what I had expected from a custom lower
One thing I forgot that was included is the anti-wiggle pin in the lower...very cool.
Look at jimy's lower he has a 6 digit serial and his looks centered why is yours differant???
They all start with ATRS08, then 4 digits. His looks like 0017
Mine is ATRS08, with 6 digits.
I am not complaining about the serial number, I picked 6 digits
- Location
- 54°52'56"N 112°10'7"W Alpha Bravo
Oh i see I thought it was all numbers... your lower looks really good, the eagle is killerThey all start with ATRS08, then 4 digits. His looks like 0017
Mine is ATRS08, with 6 digits.
I am not complaining about the serial number, I picked 6 digits
The Eagle is out of this world.......
FWIW that isn't a representation of an eagle, its actually a phoenix. Its a pretty common mistake, the upwards curl at the back of the head is the marker for a phoenix vs an eagle in historical representations. Little known and useless fact, the USA used a phoenix on its seal before changing to the eagle. Some US institutions still use the phoenix symbol, calling it an eagle out of ignorance.
Not that it in any way detracts from your rifle, I actually like the phoenix better for looks and feel cool factor.
Note my avatar.Again a very good job on the part of ATR!!
BigUglyMan
CGN Ultra frequent flyer
- Location
- New Scotland
Long Range Canuck
CGN frequent flyer
- Location
- Athabasca Alberta aka God's Country
I've been asleep at the wheel!!! Ok BUM that one is going to cost ya!!
Rick I've been way outa touch!! those are awsome AR parts!!! even in PINK!
And I didn't weasle outa nothing I had Rick build me a shorty long before he even started making parts and most you guys would still be shootin savages and Norinco's if it wasnt for me bragin him up
!!! shoulda kept my mouth shut.......Looks like I may be needing another.
