ISSC Mk22 12" Commando Barrel?

[tknecht]

Hi, I was just wondering if you guys can get the shorter barrel for the mk22? If so can you give some details on it? All I can find is that its out there somewhere... Does it still use a shroud or is it a real bull barrel?

Will using it make the rifle need the stock pinned for legality issues?

Thanks.

 

[1WG]

It looks like 765mm oal with the stock collapsed, and 300mm barrel.
Folding the stock is -203mm.
Pinning the stock would keep it in spec.

I'm becoming more interested by the minute!!!

 

[willisworms]

I would take one of these also, pinning the stock is fine with me, I never fold it anyway

 

[nookie201]

Contact me if you want one.

 

[brandneo]

is it still NR with the 12"?

 

[StylinMike]

is it still NR with the 12"?

Only if you pin the stock so that it is no longer able to fold. Barrel length laws do not apply to rimfire rifles. Overal length laws, however, do apply. Neat fact... Barrel length laws do not count flash hiders, etc. as part of the barrel's length. Overall length laws make no such exemption.

 

[brandneo]

Ohh...very interesting, where do these barrels exist? I can't find anything on the net, price?

 

[ezkmo]

I would like a commando as well. Any news???

 

[jordanmalmal]

Really cool looking .22 and lots of cool features... I would be interested.

 

[fenceline]

I'd buy a 12 inch barrel version...

VS what we are used to...

 

[jt_trouble]

I'd buy a 12 inch barrel version...

VS what we are used to...

Definitely looks better than that spaghetti noodle OEM barrel, I'd buy a 12" version if they came factory direct with a fixed stock.

 

[nookie201]

I have multiple MK22's all are non threaded barrel, I assume all in Canada are non threaded.
It's a very easy mod to shorten it. The sleave (where the supressor threads in) can be cut just as fast and no rethread required
if you cut at the rear end.

 

[Botts]

Agreed. I would also buy a 12" ISSC Mk22.

 

[djmay71]

How would be the best way of pinning the stock?

 

[PTODAV]

Tagged for interest

 

[Bigdonkey]

Has anyone thought about the rate of twist used on the factory barrel? What is it? And if you cut it down will you render it useless?

 

[Soon2Boost]

The factory cut internal thread is 9.75mm

 

[Fyn]

Only if you pin the stock so that it is no longer able to fold. Barrel length laws do not apply to rimfire rifles. Overal length laws, however, do apply. Neat fact... Barrel length laws do not count flash hiders, etc. as part of the barrel's length. Overall length laws make no such exemption.

Incorrect, muzzle devices are NOT included in OAL measurement, just as they are not inluded in barrel measurements.

 

[skip1600]

Incorrect, muzzle devices are NOT included in OAL measurement, just as they are not inluded in barrel measurements.

You are incorrect . I've personally talked to the RCMP about this and was told a threaded muzzle device that is on tight is fine and adds to OAL but NOT barrel length

 

[drift1122]

So your telling me that I can shorten the barrel as long as I pin the stock and keep it over the minimum OAL???