Lets see your complete 3 Gun Set-Up (Pics Please!)
- Thread starter Dick Proenneke
- Start date
Depending of my mood I pick one of the rifles:
RIFLES:
Core15 16" w/Aimpoint PRO, magpul afg
CZ858 w/OKO sight, Dlask extended mag release
SHOTGUN:
Remington870 w/folder, +2 extension, mesa tactical 6 shell saddle
PISTOL:
Glock 17 has been replaced by a Glock 19
If running AR15, HSGI battlebelt
If running CZ, chest rig
RIFLES:
Core15 16" w/Aimpoint PRO, magpul afg
CZ858 w/OKO sight, Dlask extended mag release
SHOTGUN:
Remington870 w/folder, +2 extension, mesa tactical 6 shell saddle
PISTOL:
Glock 17 has been replaced by a Glock 19
If running AR15, HSGI battlebelt
If running CZ, chest rig
Last edited:
AR: Norc lower build, Primary Arms 1-8x
Shotgun: Stoeger M3500, milled loading port, oversized bolt release/safety, +3 extension
Pistol: M&P Pro 9L with Apex kit and other mods
That's a nice color scheme you got going on there! U should paint the bottom of ur pistol mags to complete the look
Changes for 2017
AR
Carbon fiber handguard
Luth AR stock.
Lightweight JP barrel
Rainer upper w/o forward assist
Total weight with optic ~ 8 lbs
Pistol
Switched to a shadow 2. Just waiting on a Solecan retention holster and a wide safety for the right hand side (I use my trigger finger in 3 gun to engage the safety)
Shotgun
No changes...none expected either except that I need to figure out a better sling solution. The gun is so long it gets a little unwieldy when slung
AR
Carbon fiber handguard
Luth AR stock.
Lightweight JP barrel
Rainer upper w/o forward assist
Total weight with optic ~ 8 lbs
Pistol
Switched to a shadow 2. Just waiting on a Solecan retention holster and a wide safety for the right hand side (I use my trigger finger in 3 gun to engage the safety)
Shotgun
No changes...none expected either except that I need to figure out a better sling solution. The gun is so long it gets a little unwieldy when slung
Last edited:
Changes for 2017
AR
Carbon fiber handguard
Luth AR stock.
Lightweight JP barrel
Rainer upper w/o forward assist
Total weight with optic ~ 8 lbs
Pistol
Switched to a shadow 2. Just waiting on a Solecan retention holster and a wide safety for the right hand side (I use my trigger finger in 3 gun to engage the safety)
Shotgun
No changes...none expected either except that I need to figure out a better sling solution. The gun is so long it gets a little unwieldy when slung
That Shadow 2 is really heavy, are you sure it's appropriate for 3gun?
Changes for 2017
AR
Carbon fiber handguard
Luth AR stock.
Lightweight JP barrel
Rainer upper w/o forward assist
Total weight with optic ~ 8 lbs
Pistol
Switched to a shadow 2. Just waiting on a Solecan retention holster and a wide safety for the right hand side (I use my trigger finger in 3 gun to engage the safety)
Shotgun
No changes...none expected either except that I need to figure out a better sling solution. The gun is so long it gets a little unwieldy when slung
Thats a nice setup
That CZ75 with the black grips is a beauty!
juancarlos
CGN frequent flyer
- Location
- The Island
Finally got around to taking a pic or two:
AR15:
KAC 11.5 CQB Upper
MEGA Arms Billet Lower
BCM KMR
VG6 Epsilon with cage device
Trijicon MRO
Shotgun:
Beretta 1301 Competition 21"
SJ +1 Ext
Pistol:
Walther PPQ Q5 Match
Belt:
Safariland ELS with Solely Canadian Pistol Holster and Mag Carriers
AR15:
KAC 11.5 CQB Upper
MEGA Arms Billet Lower
BCM KMR
VG6 Epsilon with cage device
Trijicon MRO
Shotgun:
Beretta 1301 Competition 21"
SJ +1 Ext
Pistol:
Walther PPQ Q5 Match
Belt:
Safariland ELS with Solely Canadian Pistol Holster and Mag Carriers
Last edited:
Firstfishman
Regular
- Location
- Edmonton, Alberta
Tacord built Versamax Open shotgun, Vortex Razor dot, Arredondo chute and tubes, Mesa forend, GGW brake and home built Mid comp and stippling done by me
Sig M400 Predator, 18", TT Trigger, Faxon light weight BCG, JP recoil and gas system, Vortex Viper Gen 2, Vortex Venom on 45 degree
CZ Shadow 2, Vortex Razor, Tanfo mags
Last edited:
Tacord built Versamax Open shotgun, Vortex Razor dot, Arredondo chute and tubes, Mesa forend, GGW brake and home built Mid comp and stippling done by me
Sig M400 Predator, 18", TT Trigger, Faxon light weight BCG, JP recoil and gas system, Vortex Viper Gen 2, Vortex Venom on 45 degree
CZ Shadow 2, Vortex Razor, Tanfo mags
Sweet setup.
Where'd you get the cheek riser for the Versamax?
I re moulded one from a Magpul SGA. Heat gun, Dremel and a couple hours to fit it.
They are from S&J Hardware. I've had the for a while but I'm not sure if they are still available from them or not. They do work well as the extra weight helps the leave the mag well without issues.
Tacord built Versamax Open shotgun, Vortex Razor dot, Arredondo chute and tubes, Mesa forend, GGW brake and home built Mid comp and stippling done by me
Sig M400 Predator, 18", TT Trigger, Faxon light weight BCG, JP recoil and gas system, Vortex Viper Gen 2, Vortex Venom on 45 degree
CZ Shadow 2, Vortex Razor, Tanfo mags
Very nice setup!
