So (it appears) it's angled inwards to fit an 11-slot pic rail and it attaches with 2 quick connects? How is the connector attached to the receiver? A bolt in the end where stock attaches and... anywhere else? The unit can be removed so the shotgun can be used on it's own with a stock, correct? Is the unit going to be sold separately?
edit: oops... should've read the weblink first. Answers some questions, but still, will you be selling the "Attachment Mechanism" separately? (along with the stock quick-connector mentioned in the link)
Thanks for this by the way, it look like a very cool product indeed and I will getting myself one.
So here is where we are currently at
1) We have plans to sell the mount on its own.
2) Right now they fit perfectly on a rail 4" or bigger.
The mount ONLY needs to have 8 slots to attach into, however 10 slots is what we recommend. It gives quite a bit more room for the clamps to properly "grab" onto.
3) Due to what these are, we basically have to get a ton of custom bolts made for us which we'll be ordering in a fairly massive amount. Haha. There are three securing bolts on the top and a very large on in the buttstock end.
Once this is on, it COULD be removed... However it's not meant to be put on and off. We've tried to price this very fairly for what it is. It should be cost effective enough that once bought, it is a dedicated under barrel.
However!!! Like we said, we're planning on releasing a propitiatory BUTTSTOCK / PISTOL GRIP combination that will quick attach on to allow this shotgun to be "shoulder" fired, as right now it can ONLY be fired when mounted to another platform.
In addition, we'll have a QUICK RELEASE optic mount which will allow you to slap an optic on the top and remove it when not needed. It will HOLD ZERO, making it even cooler!
Everything we'll be releasing from now on, is 100% designed and MFG in Canada or the USA. We are using the best parts available to us to ensure reliability, cost effectiveness and performance. We want to get you the best bang for your buck.
We're hoping everyone agrees that our price is fair on this. A lot of time goes into designing, testing, and of course MFG'ing a product. We hope this is just the beginning!
In a few months time, we'll open the doors to clients to give us ideas on what they want to see next.
We plan on staying for a long long time. We would love to have all of your there with us.
Thanks again everyone for being so patient! Let the blasting begin!
Stay tuned.
