Look for the flatest shooting cailber for next build! HELP!!

hotspot

Regular
Rating - 100%
67   0   0
Hi iam looking for some advice in my next rifle build looking for something nice a flat shooting!
and advise would be nice cheers!
 
What kind of shooting are you doing and to what distance. A .204 ruger and a .375 cheytac both shoot flat, we need more info to give any meaningful advice.
 
A 7mm rem mag will fill the bill very nicely.
My long barreled 7mm rum is about as flat as they come. 4.9 moa puts me dead on at 500 and 15.5 puts me dead on at 1000( these are not calculated but actually POI). Of course I am putting out a 162 amax out at 3600 fps( 91.2 grains of RL25).
 
?????????????? 3600 ft/sec???? What barrel length??


A 7mm rem mag will fill the bill very nicely.
My long barreled 7mm rum is about as flat as they come. 4.9 moa puts me dead on at 500 and 15.5 puts me dead on at 1000( these are not calculated but actually POI). Of course I am putting out a 162 amax out at 3600 fps( 91.2 grains of RL25).
 
Hey Canuck. That 1000yd MOA gave me an evil laugh. How long is your barrel and what not? Bullet?
If the op wants fast and flat I don't think anything can touch that.
 
you dont need flat and LR shooter for 500m.
go buy any rifle and decent scope for that range and you are good to go.
1000+ yards its different story. your budget and style of you build. benchrest, tactical, hunter, or whatever your mind is set on.

for 500m deer i would just use 308. cheap and effective. Cheap to reload or tons of factory ammo available.
 
A 7mm rem mag will fill the bill very nicely.
My long barreled 7mm rum is about as flat as they come. 4.9 moa puts me dead on at 500 and 15.5 puts me dead on at 1000( these are not calculated but actually POI). Of course I am putting out a 162 amax out at 3600 fps( 91.2 grains of RL25).

I smell something foul here.
162 A-Max with RL25 on 7MM rem Mag... The max powder will be at 69.3grains of RL25 which you could go over a grain or two depending if your brass is showing plunger marks or not.. 91.2 grains of powder.... is somewhat in ball park with "300RUM" which i have. Mine
will push 165 A-max @ around 3400FPS with 96.4grains of Powder....
 
I smell something foul here.
162 A-Max with RL25 on 7MM rem Mag... The max powder will be at 69.3grains of RL25 which you could go over a grain or two depending if your brass is showing plunger marks or not.. 91.2 grains of powder.... is somewhat in ball park with "300RUM" which i have. Mine
will push 165 A-max @ around 3400FPS with 96.4grains of Powder....

He's using a 7RUM, not a 7RM...
 
A 7mm rem mag will fill the bill very nicely.
My long barreled 7mm rum is about as flat as they come. 4.9 moa puts me dead on at 500 and 15.5 puts me dead on at 1000( these are not calculated but actually POI). Of course I am putting out a 162 amax out at 3600 fps( 91.2 grains of RL25).

All that and a 3500 rnd barrel life,.... The internet is awesome!!!!
 
Flat and have knock down power if need for hunting deer!

Hotspot, Are you venturing away from the 7mmSTW? The STW has plenty of what you are looking for.
Super flat shooting, super fast if you want, and it will flatten deer in their tracks.
 
Back
Top Bottom