Hmmm wonder if it's just thread locked in or what. Glad I like the oem brake
M+M Industries M10x DMR - Non-Restricted 18.6” in 7.62x39mm Canada
- Thread starter North_Sylva
- Start date
Hmmm wonder if it's just thread locked in or what. Glad I like the oem brake
The same as 7.62x51mm and .300 Blk. 5/8x24
r34skyline
CGN Ultra frequent flyer
Rog. I was expecting that or 14x1 rh a la ak. Thanks for the clarification. Do you have any experience with the pws fsc 762 comp?
Nope, not me.
That hole is indeed for a QD sling swivel. There is a corresponding hole at the front of the Handguard on both sides, however it is slightly undersized for a QD swivel. Weird - I wonder if that was a machining error? If so, that would be the first thing that I have found to be out of spec on this rifle...
Mine all accept a qd swivel. Possible out of spec or chitty chinese qd?!?!?
WorldOfWarships
New member
- Location
- British Columbia
Looks pretty cool
I thought some of you might be interested in a direct comparison shot with the inspiration for the complete Lower Receiver of the M10X as well as its Bolt Carrier Group, which is very close to the Swissarms (itself derived from the AK/AKM):
Those look great! Thanks for the comparison. There are also some of us that are interested in where to get mags like that. Any help?
The company that got the boot from CGN used to carry them... I got mine out of the USA. Soviet mags are $$$
My bakelite mags came from a big dealer in the UK. I had them shipped to a 3rd party importer in Yuma, Arizona for rivetting and importation. It was not a cheap route to go, but at the time there were no alternatives because all US dealers so were sold out. That may or may not be the case any longer.
Bakelite? Or just PMags? Or do you mean the rifles?
Last edited:
Well I got out to the range with my M10X this morning. I originally tried it with a Meprolight red dot but switched to a Bushnell AR Optic 3-12X for accuracy testing and I shot at 12X with parallax dialed out.
It likes to feed Dominion and Hornady ammo but its far from reliable with Norinco copper washed ammo. I had one round that just did not want to come out and I had to drive the charging handle into the table a few times to clear it.
Accuracy in general was less than I expected and not as good as my Chinese SKS. Closer to my scoped Marlin 30-30.
Accuracy with Hornady ammo was best of the 3 types tested but nothing I would brag about. Smallest 5 shot group at 100 meters was 2.75 inches. Most we closer to 4 inches. Some were a little worse.
My feeling is that it would probably shot better with some work on the gas system. I tried running it with the gas off, but setting to 0 is not really off. But at 0 I shot the best groups.
I would like to see the gas system adjustment more positive and tactile because its kind of wishy washy and I was never quite sure it was where I wanted it.
I did have a little trouble inserting the mag sometimes because if I wasn't quite vertical it got stuck and I'd have to work it lose again.
Overall I do like the rifle even though this feedback probably sounds a little harsh.
Since they call it a DMR rifle I was honestly expecting better accuracy.
Hopefully other guys are getting better accuracy than I did.
It likes to feed Dominion and Hornady ammo but its far from reliable with Norinco copper washed ammo. I had one round that just did not want to come out and I had to drive the charging handle into the table a few times to clear it.
Accuracy in general was less than I expected and not as good as my Chinese SKS. Closer to my scoped Marlin 30-30.
Accuracy with Hornady ammo was best of the 3 types tested but nothing I would brag about. Smallest 5 shot group at 100 meters was 2.75 inches. Most we closer to 4 inches. Some were a little worse.
My feeling is that it would probably shot better with some work on the gas system. I tried running it with the gas off, but setting to 0 is not really off. But at 0 I shot the best groups.
I would like to see the gas system adjustment more positive and tactile because its kind of wishy washy and I was never quite sure it was where I wanted it.
I did have a little trouble inserting the mag sometimes because if I wasn't quite vertical it got stuck and I'd have to work it lose again.
Overall I do like the rifle even though this feedback probably sounds a little harsh.
Since they call it a DMR rifle I was honestly expecting better accuracy.
Hopefully other guys are getting better accuracy than I did.
Lungorthin
Regular
- Location
- Calgary, AB
HHMMM...Glad I'm still on the fence..Almost did a impulse buy last night(glad I didn't)
It's a $2000+ gun with lots of comparables coming to market in other calibres
