M+M Industries M10x DMR - Non-Restricted 18.6” in 7.62x39mm Canada

Maple57 said:
Well I got out to the range with my M10X this morning. I originally tried it with a Meprolight red dot but switched to a Bushnell AR Optic 3-12X for accuracy testing and I shot at 12X with parallax dialed out.

It likes to feed Dominion and Hornady ammo but its far from reliable with Norinco copper washed ammo. I had one round that just did not want to come out and I had to drive the charging handle into the table a few times to clear it.

Accuracy in general was less than I expected and not as good as my Chinese SKS. Closer to my scoped Marlin 30-30.

Accuracy with Hornady ammo was best of the 3 types tested but nothing I would brag about. Smallest 5 shot group at 100 meters was 2.75 inches. Most we closer to 4 inches. Some were a little worse.

My feeling is that it would probably shot better with some work on the gas system. I tried running it with the gas off, but setting to 0 is not really off. But at 0 I shot the best groups.

I would like to see the gas system adjustment more positive and tactile because its kind of wishy washy and I was never quite sure it was where I wanted it.

I did have a little trouble inserting the mag sometimes because if I wasn't quite vertical it got stuck and I'd have to work it lose again.

Overall I do like the rifle even though this feedback probably sounds a little harsh.

Since they call it a DMR rifle I was honestly expecting better accuracy.

Hopefully other guys are getting better accuracy than I did.
Click to expand...

The accuracy i never expected to be phenomenal but that is very disappointing to hear about the reliability with surplus ammunition. Did you try any of the other surplus? Like czech or bulgarian?
 
Maple57 said:
Well I got out to the range with my M10X this morning. I originally tried it with a Meprolight red dot but switched to a Bushnell AR Optic 3-12X for accuracy testing and I shot at 12X with parallax dialed out.

It likes to feed Dominion and Hornady ammo but its far from reliable with Norinco copper washed ammo. I had one round that just did not want to come out and I had to drive the charging handle into the table a few times to clear it.

Accuracy in general was less than I expected and not as good as my Chinese SKS. Closer to my scoped Marlin 30-30.

Accuracy with Hornady ammo was best of the 3 types tested but nothing I would brag about. Smallest 5 shot group at 100 meters was 2.75 inches. Most we closer to 4 inches. Some were a little worse.

My feeling is that it would probably shot better with some work on the gas system. I tried running it with the gas off, but setting to 0 is not really off. But at 0 I shot the best groups.

I would like to see the gas system adjustment more positive and tactile because its kind of wishy washy and I was never quite sure it was where I wanted it.

I did have a little trouble inserting the mag sometimes because if I wasn't quite vertical it got stuck and I'd have to work it lose again.

Overall I do like the rifle even though this feedback probably sounds a little harsh.

Since they call it a DMR rifle I was honestly expecting better accuracy.

Hopefully other guys are getting better accuracy than I did.
Click to expand...

The stuck casing is probably a result of a not cleaned chamber and lacquer built up in it is my guess. As for an sks being more accurate I'd love to see an actual vid proving that.

I'll deliver on my report once my wrist is healed up and put it side by side with a T81, Cz858, Vz58 etc.... to see real results.

Funny as Norc non corrosive ammo is some of the best x39 ammo I have shot, and I've shoot alot of it thru many different rifles
 
Looking to buy another NR rifle...this one is on the list:

M+M Industries M10X DMR - $1,999
STAG Arms STAG-10 LEV2 - $1,945
Black Creek Labs BCL102 - $1,499
Kodiak Defense WK180C - $1,095

But is it worth the money? ~ Twice the price of the 180? It's all subjective since I have paid much more money for NRs like the SA Classic Green, RA M96, and IWI Tavor. I am going to be handling each this week and will find out how they compare that way. I like what I see in videos...
 
IchBinEinSniper said:
Looking to buy another NR rifle...this one is on the list:

M+M Industries M10X DMR - $1,999
STAG Arms STAG-10 LEV2 - $1,945
Black Creek Labs BCL102 - $1,499
Kodiak Defense WK180C - $1,095

But is it worth the money? ~ Twice the price of the 180? It's all subjective since I have paid much more money for NRs like the SA Classic Green, RA M96, and IWI Tavor. I am going to be handling each this week and will find out how they compare that way. I like what I see in videos...
Click to expand...

You’re talking about 3 different calibers here.
If you’re not worried about caliber get the WK.
 
IchBinEinSniper said:
Yup...those are 3 different calibers. Not worried about getting the cheapest thing, want something fun, and interesting.
Click to expand...

I have all but the WK. My vote of what you have listed would be the Stag10, and of what you do not have listed is the ATRS MS. Today is the last day to get in on ATRS' production run 2 delivery and if you do full payment on the lower you skip C71. Production run 2 is scheduled for a fall delivery.
 
onetwentyish said:
I have all but the WK. My vote of what you have listed would be the Stag10, and of what you do not have listed is the ATRS MS. Today is the last day to get in on ATRS' production run 2 delivery and if you do full payment on the lower you skip C71. Production run 2 is scheduled for a fall delivery.
Click to expand...

for FORWARD ASSIST uppers only. Dont order slick side if you want delivery this fall.
 
Maple57 said:
I had one round that just did not want to come out and I had to drive the charging handle into the table a few times to clear it.
Click to expand...

I had the same problem with Norinco. I had to use cleaning rod to hammer it out.

I think Norinco is hotter and on setting 2, action cycles too fast. Although there was no damage to the casing.

What setting was the gas system on when you got stuck casing?
 
Hey CGN'ers,

After negotiating a special buy on a year end sale with M+M Industries, we are happy to announce the MAP price on the M10X rifles has been lowered to $1,699.00

Please visit any of the dealers on the 1st post on this thread to secure yours today!

Thanks,
 
North_Sylva said:
Hey CGN'ers,

After negotiating a special buy on a year end sale with M+M Industries, we are happy to announce the MAP price on the M10X rifles has been lowered to $1,699.00

Please visit any of the dealers on the 1st post on this thread to secure yours today!

Thanks,
Click to expand...

Don't you mean after realizing these are soon to be prohibited we want to clear our inventory before its too late ? :rolleyes:
 
#1bcshooter said:
Don't you mean after realizing these are soon to be prohibited we want to clear our inventory before its too late ? :rolleyes:
Click to expand...

More like we screwed up but we’re too proud to admit it right away.

For 1700 msrp I’ll get one when it goes on sale for 1500. A step in the right direction.
 
Jon. said:
More like we screwed up but we’re too proud to admit it right away.

For 1700 msrp I’ll get one when it goes on sale for 1500. A step in the right direction.
Click to expand...

I will get one when they go on clearance for 600$ When they realize that it was overpriced and noone is buying them
 
North_Sylva said:
Hey CGN'ers,

After negotiating a special buy on a year end sale with M+M Industries, we are happy to announce the MAP price on the M10X rifles has been lowered to $1,699.00

Please visit any of the dealers on the 1st post on this thread to secure yours today!

Thanks,
Click to expand...

Get them down to 1200 where they should have been originally, then we'll talk
 
You must log in or register to reply here.
Back
Top Bottom