Made for Canada, Ballisitic Advantage18.6 Hanson profile 5.56 Barrel for your Raven or Crypto build

[Saskatoon Gunworks]

Any range reports on these (preferably with 75/77gr ammo)?

If someone has tried out the heavier rounds please post up.

 

[Saskatoon Gunworks]

I few people have asked about the packaging being marked 18.5" when we advertise as an 18.6", the reason is that it is made in the US where the BATF stipulates that the measurement is of the barrel shank alone, whereas in Canada, we measure from the muzzle to the closed bolt face.

FYI there will be free shipping on orders of $300 or more of goods this week, discount code SHIPPING

 

[Nismojunky]

Do you offer match grade barrels?

 

[Grain]

Ordered.

 

[hardcorehenry]

What is the life expectancy is on these ?

 

[CC89]

I few people have asked about the packaging being marked 18.5" when we advertise as an 18.6", the reason is that it is made in the US where the BATF stipulates that the measurement is of the barrel shank alone, whereas in Canada, we measure from the muzzle to the closed bolt face.

FYI there will be free shipping on orders of $300 or more of goods this week, discount code SHIPPING

I don't see a field to add the code. Is it still valid?

Nvm found it.

 

[wildhog007]

Before going to check out you have to view cart and you can add it there

 

[Lucky47]

do you have rifle length gas 18.6 barrel?

 

[Saskatoon Gunworks]

do you have rifle length gas 18.6 barrel?

Sorry no, after consulting with Ballistic Advantage, it was their recommendation to go with Mid length for this production run.

 

[CC89]

Soooo how aboutaaaaaaa another Sale / discount code? Just bought a crypto receiver. Need parts lol.

 

[Saskatoon Gunworks]

We will be continue with Free shipping on order over $300 of goods for Feb. with code SHIPPING, promo will start tomorrow afternoon

 

[Saskatoon Gunworks]

All orders over $300 of goods is now free shipping, no code required.

 

[Someone76239]

Thank You looks amazing you hit every spec Perfectly

 

[Saskatoon Gunworks]

Thank You looks amazing you hit every spec Perfectly

Thanks appreciate the kudos

 

[Leg]

Sorry no, after consulting with Ballistic Advantage, it was their recommendation to go with Mid length for this production run.

Interesting. All of their 18” 5.56mm/.223 barrels are rifle length gas on their webpage.

 

[Grain]

Interesting. All of their 18” 5.56mm/.223 barrels are rifle length gas on their webpage.

Their 17.7" 3 gun barrels are mid length.

 

[CC89]

Had customer have a few issues pinning his gas block this past weekend, so thought I would pass on a couple tips to prevent issues.

First, line up the gas block by manually inserting a 1/8 drill bit (vicegrips to hold drill bit works well) work it far enough that the shaft of drill bit is in the groove for pin.

View attachment 843660


After you have block nicely lined up and held in place with drill bit, tighten set screws well, these will hold gas block in place when installing gas block pin.


View attachment 843667

Lastly, if you have a pin starter that works best, if not just take your time with a punch, and always try and hammer towards yourself, you will have more control that way.

View attachment 843669


Easy peezy, few taps and your done.




View attachment 843670

Will these set screws work themselves loose overtime? Should I blue locktite them?

 

[Saskatoon Gunworks]

Will these set screws work themselves loose overtime? Should I blue locktite them?

I normally use locktite when installing gas blocks.

 

[Spartan46]

Will these set screws work themselves loose overtime? Should I blue locktite them?

vibra-TITE 19960 Hot-Lock Extreme High Temperature Threadlocker or Rocksett!

Forget about blue loctite, it will melt pretty fast under heat!

 

[Grain]

Will these set screws work themselves loose overtime? Should I blue locktite them?

The rollpin is doing all the work on these barrels.