MAK tube gun #2 just finished

ONT0001

ONT0001

CGN Regular
Rating - 100%
56   0   0
2nd rifle (bottom) built on a PGW M15 and MAK tube gun kit and Magpul PRS.
Top was first built using a tweeked Rem 700 and prooved itself to have potential
in F class Open as a LR precision shooter last summer.
Both are single shot configurations in 6.5/308 Ackley 40 (260AI)
Next build is a repeater.
MAK Tube Gun Kits provides another stocking option for the precision rifle build and very adaptable to shooters needs.Easy switch barrel,switch butstock,switch forends.
MAK12.jpg

Just need some warmer weather to break her in.
 
Very nice!
I'm not familiar with these. How accurate are they? Are they more accurate than a stock 700p or 10fp.
 
How accurate are they? Are they more accurate than a stock 700p or 10fp.
Click to expand...
Well, no bedding issues, probably a aftermarket trigger, custom barrel, very advanced reloading skills...it will outshoot a stock 700p or 10FP. Also, the triggerman (ONT0001) is rock solid when it comes to superior performance.

Terry Perkins
 
Mak

Here are some pics of MAK build 1.Camera is acting up so new pics a problem at moment.
Mak1.jpg

mak3.jpg

maktube3.jpg

other pics and info at http://www.tubegun.net/
3 new builds are being done/in works on the Barnard actions.
Kit is designed to accept Rem 700 action and their clones.
Ont0001
 
Is there a place in Canada that carries these or do you need to import them? What's the approx. final cost for one of these guys (I know there's a lot of variables for a kit like this, but humor me...) minus optics?
 
ERT
If you already have a Rem 700 SA
KIT (single shot in black) ,you'll need to check with Kevin at MAK for availability and current pricing is 556 usd plus.Repeaters and Lefties are available.Colours are available and Kevin was even looking at cammo versions.
Magpul PRS is 320 I believe, cdn from Wolverine but accepts regular AR butstocks like I started with(see pic)
standard or 20 moa rail included.
will need AR buffer tube (10 or 20$) .
Chambered and fitted barrel? new -best check with your smith for prices
or you can use existing Rem barrel but kit does not use recoil lug.Can trim down existing lug so current factory barrel is ok to use.
No safety or bolt release needed or used.(can be adapted if required)
Bedding by Devcon or JB Weld ,a little patience and very little fitting.
Everything else is whatever options you want to add.
So in simplest terms,using existing barreled Rem 700 and trigger,just the cost of the kit,a buffer tube,an AR butstock and a package of JB Weld and you're GTG.Would recommend using your smith's services for trigger and lug mods.
Drop Kevin a line.He's getting used to hearing from Canadians now :)
Best
Ont0001
 
You must log in or register to reply here.
Back
Top Bottom