Maple Ridge Armoury AR10 Barrels. Shot targets added post #75 Nov 16th

Most 6.5 CM bolt and gas guns offer that calibre in 20" barrels including Stag
I am assuming it is because 20" is the sweet spot for the ballistic advantages of the 6.5 CreedMore, however, smarter people then I would need to clearly articulate this.
 
so... no custom order possible, right ? I would rather avoid having to contract another machine shop to remove the 1.4" extra material, especially as it was once available.
 
essorx said:
so... no custom order possible, right ? I would rather avoid having to contract another machine shop to remove the 1.4" extra material, especially as it was once available.
Click to expand...

I apologize, the 18.6" length posted on our website was in error. We will not be making any 6.5 Creedmoor barrels in 18.6" lengths. We are running several hundred barrels a month and unable to do custom work.

Through extensive testing, we have determined that 20" is the shortest barrel length capable of producing positive results with the widest range of ammunition.

With that said, we are considering a 24' Creedmoor barrel because of the advantages of longer barrels in 6.5 Creedmoor.

I am sorry we cannot be of assistance to you.
 
mileageman said:
what happened to the 18.6" 6.5 Grendel pencil barrels on your website? I was going to order one but now they aren't there.
Click to expand...

Thank you for pointing this out.

I was consolidating products to make it easier to browse and I neglected to enable this length for the 6.5 Grendel.

Please check the website again, the 18.6" length is now available.
 
Thanks for adding the 18.6" length back. But I thought there was a option for 18.6" pencil barrels in 6.5 grendel before? I see there is still an option for 18.6" pencil barrels in .223 wylde.

I'm just hoping to cut a bit of length and weight over my current 20" barrel for hunting.
 
mileageman said:
Thanks for adding the 18.6" length back. But I thought there was a option for 18.6" pencil barrels in 6.5 grendel before? I see there is still an option for 18.6" pencil barrels in .223 wylde.

I'm just hoping to cut a bit of length and weight over my current 20" barrel for hunting.
Click to expand...

Yes we will add the pencil option but we likely wont run any until end May.
 
Any luck on posting the POI shift test for your pencil barrels?

I have a Stag 10 in 308, and would definitely buy Canadian over Faxon if it passes the test.

It would be great to shave 2 pounds off the muzzle end, over the stock barrel.
 
^^^ pretty sure they weren't making Ar10 barrels before they switched to using IBI blanks.

It's only some of the earliest made Ar15 barrels that were made with blanks from a different company.

Confirmation directly from MRA would be appreciated from me as well.
 
All Maple Ridge Armoury barrel with the Match 5R designation are made using blanks from IBI.

All other Match and other barrels are made using premium barrels from Green Mountain Rifle Barrel Company.

The Match designation for any of our barrels refers to the honing and hand lapping performed during the blank making process.
 
You must log in or register to reply here.
Back
Top Bottom