I have good result with Sierra 69 grs bullets.23.6 gr Varget, BR4 primers, 70 gr Berger vld target, SA 20 barrel, 3/4 moa at 100yd.
These rifles seem to prefer heavier bullets.
I have good result with Sierra 69 grs bullets.23.6 gr Varget, BR4 primers, 70 gr Berger vld target, SA 20 barrel, 3/4 moa at 100yd.
Lyman 51st edition states 27.8gr max load. I'm averaging 2991fps for 10 rounds.that's a hot (very) load.
23.6 gr Varget, BR4 primers, 70 gr Berger vld target, SA 20 barrel, 3/4 moa at 100yd.
I'll be trying heavier bullets next year. The goal is coyotes this winter.I have good result with Sierra 69 grs bullets.
These rifles seem to prefer heavier bullets.
I noticed during the reloading process that there's a difference in case capacity between different brands of brass which would lead to higher pressure in some. Likely the ones with the extraction issue. I wonder why different manuals have so much discrepancy. I can see Hodgdon doing it for liability issues, but my velocities aren't crazy compared to theirs. Barrel length might subtract 100fps in my case. Their OAL is lower also by 0.060".I saw this in the Lyman manual as well, but look at your primers, they are no just flat, they are hammered.
Here is what they say on the Hodgdon web site:
View attachment 1238242
Your spent primers are trying to tell you something.I used the RCBS small base sizing die and went out the other day. I had my brass catcher on so I don't definitely know that the two rounds thaat were still hard to eject were the two odd head stamps out of ten that I shot, but I'm assuming so. I'll be culling that brass as I move forward.
View attachment 1238181
Using the same 27gr load of Varget with 55gr V-Max bullets and a Trigger Tech trigger gave me some reasonable results. Two 100 yard 5 shot groups. I put up my 200 yard target by mistake so ignore that part of my writing on the target. I called the two flyers on each group so I think this rifle shoots pretty well.
View attachment 1238189



























