No drums will work because of the deep magwell, sticks only. All the other 25 rd mags will work in the kit. My rifle was brand new also when i tested the mags, the more i shot, the better they worked. Mine did not like Blazers at all.
Marauder kit review, new mags are in stock now.
- Thread starter hical.ca
- Start date
No drums will work because of the deep magwell, sticks only. All the other 25 rd mags will work in the kit. My rifle was brand new also when i tested the mags, the more i shot, the better they worked. Mine did not like Blazers at all.
I use wipeout foam for the bore, or brush, every time i use it, then i just spray down thru the ejection port & magwell with WD40 or similar solvent/cleaner, then hit it with compressed air if available. I will do a complete breakdown every 3000 rounds or so.
yeah thats what i figured... i use a bore snake through the barrel and g96 clp sprayed in through the magwell and ejection port. then i wipe up as much dirty lube out of through the mag well.
Thanks again Dave!
AlbertaGunslinger
Regular
- Location
- The Wide Open Prairie
If I were wanting to put myself down for one of these from you now what kind of wait am I looking at?
We expect the next shipment before the end of Aug, Promag seems to be running well right now! Give us your name & ph # & you will be contacted when they are ready to be shipped. No payments until we ship.
P0WERWAGON
CGN Ultra frequent flyer
- Location
- burnaby BC كافر
thats about all that fits though
Bolt B'tard
Regular
- Location
- Wilds of Nova Scotia
The Marauder kit's handle/rail slides into a dovetail front to back as well as being secured by scews. This was shown on one of the breakdown videos posted here.
The few airsoft versions I've seen *appear* to dovetail in place and are held in by screws. Whether the dovetails are the same or not...
Last edited:
There should be 2 retaining pins in your hardware, 1 for the muzzle brake, the other for the fake silencer.
LuckyLuc82
CGN Ultra frequent flyer
- Location
- Rockwood, Ontario
$700 + $250 each mag! What it should cost!!!!! $230 is a steal!
We have had a handful of problematic magazines this first run, it was due to a temp fluctuation in the machines. There is an easy fix for any mags with feeding issues.
1. Make sure magazine is unloaded.
2. Remove internal components.
3. Remove replaceable feedlips.
4. Try to fit a .22LR cartridge through the slot in the top of the magazine body. It will drag slightly at the front and the rear of the shell.
5. Use a small file or hobby knife to gently scrape a very tiny amount of material from both sides of the opening.
6. Test that the cartridge now slips through with no resistance what so ever. If it still makes contact, repeat #5.
7. Reassemble magazine making sure the top of the spring has the last coil towards the front of the magazine.
8. Magazine will now function perfectly.
Future magazines will no longer have this issue. Thank you for your patience and support.
1. Make sure magazine is unloaded.
2. Remove internal components.
3. Remove replaceable feedlips.
4. Try to fit a .22LR cartridge through the slot in the top of the magazine body. It will drag slightly at the front and the rear of the shell.
5. Use a small file or hobby knife to gently scrape a very tiny amount of material from both sides of the opening.
6. Test that the cartridge now slips through with no resistance what so ever. If it still makes contact, repeat #5.
7. Reassemble magazine making sure the top of the spring has the last coil towards the front of the magazine.
8. Magazine will now function perfectly.
Future magazines will no longer have this issue. Thank you for your patience and support.
TheGamerXxX
CGN frequent flyer
- Location
- North of the 49, Manitoba
Hey HiCal.
I sent you a messege a while back about getting the whole KIT including the 10/22 components but never heard back.
Im interested in total price, as well as when it would be available.
Thanks
I sent you a messege a while back about getting the whole KIT including the 10/22 components but never heard back.
Im interested in total price, as well as when it would be available.
Thanks
PM sent, we have a preorder list going for prebuilt kits.
