I have a Klinsky stock for a #4 Brno 22 target rifle. One of the receiver screws/bolt is to short for this stock. It's only holding by about 1 thread. I'm trying to find a Metric # 6 x 1 standard thread about 1 3/4" long. I've checked three gunsmiths but no luck. Is there a mail order place anyone know of or anyone have a spare ?
Metric screws
- Thread starter got to go
- Start date
Blastattack
CGN Ultra frequent flyer
- Location
- Winnipeg MB
Go to your local fastener supply store an buy one. You're looking for an M6x1, in whatever length your screw is. Screw length is determined by the length of the shaft, not including the head.
Flathead screw are measured over all length, sockethead capscrews and such are measured by the length of the shaft.
Blastattack
CGN Ultra frequent flyer
- Location
- Winnipeg MB
Fair enough. Still, Industrial supply store. Gunsmith's won't have the large selection of random metric screws for every action. Try machine shops as well if you can't find an industrial supplier.
At one time Canadian Tire had a decent supply of auto metric fasteners.
Different head configurations too.
If you have one nearby, check them out.
See if the auto department offers the oddities too as well as the hardware/tools department.
Different head configurations too.
If you have one nearby, check them out.
See if the auto department offers the oddities too as well as the hardware/tools department.
- Location
- Chilliwack BC
fuller metric
- Location
- Abbotsford BC
Fastenall is great for all the weird stuff, but you'll be buying them by the 100's........ Fastenall sux in this are.
Depends on the branch, some will break boxes if you only need a few, some branches won't.
Thanks, I'll give them a call. They may not want to bother with me, looks like they sell 100 to a box. Worth a try though. I'll check Canadian Tire too.
