While you are on the site, in your browser find and click "Add to Home Screen" A CGN beaver app icon will then be created to your phone that is directly link to the site.
Note: This feature may not be available in some browsers.
If I have a scope that is set for 1/4 moa and I'm shooting 1000 yrds, if I need to adjust my scope 10 moa, does that mean that I have to 40 clicks? Will that move the impcat point 100 inches then ?
If I have a scope that is set for 1/4 moa and I'm shooting 1000 yrds, if I need to adjust my scope 10 moa, does that mean that I have to 40 clicks? Will that move the impcat point 100 inches then ?
But, it may not be 100inches exactly if you go 40 clicks. For example, in a 1/4MOA scope like yours, if you adjusted your scope 4 clicks up at 100yards, you cannot expect it to go exactly 1" unless you have tested and compensated for it already.
Scopes seldom give exactly one minute of movement per 4 clicks. Some of my scopes need 5 clicks. Some came from the factory with different clicks in the wind knob vs the elevation. Leopold.
It is useful to shoot a calibration target with 3 shots, then up 5 minutes, then left 5 minutes, then down 5 minutes then right 5. pattern should be square. often is not.