Modern Sporter - Build Discussions

Qwerty1zer said:
It saddens me knowing were into September and the 200's haven't seen or heard anything yet.
I'm in the 400's, heres to hoping they're doing large batches!
Click to expand...

While at the shop today on unrelated business, all the guys are hustling back and forth between the 2 shops with lowers in various stages of completion. I was told some lowers are out for anodizing and they should be back in the next week or 2. I felt sorry for Rick today running his ass off as Dustin and Shaun are away to TACCOM for the week. 2 phones ringing, emails to deal with and guys like me wanting buy stuff is a lot for 1 guy to manage at once.

Like Rick keeps pointing out they can be making lowers or answering emails, phone calls and entertaining drop ins who are there just to waste some time but not both.

From experience with several other guns they have built for me, when they say they will call when it is ready, they DO!

Apparently all of the uppers for runs 2&3 are done, and lowers are being run now and yes Qwerty1zer they are making aLARGE batch as in close to 1000 lowers . There are literally pallets of blocks stacked up awaiting their turn in a machine.

Patience guys, all good things will come. From what I saw today things are getting real close.
 
Realistically, I'll be happy to get my receivers by Christmas. If any new information is available, it will be posted on the forum or in your email.

I feel like asking for updates is a futile task. The updates will be posted as fast as anyone with any could type.

Let's not be the guy that Rick puts to the bottom of the pile for making the phone ring off the hook, or flooding his inbox. Your receivers are in the hands of professionals, gentleman.
 
I just want it before hunting season, I ordered in October and have a low serial number. I have been very patient and will be very upset to miss out another season. They should not have given a date if they can’t meet it, Or at least update... we will understand if there are complications.
 
tsarmn said:
Anyone having trouble using 5.56 in MRA's 18.5 inch mid length gas barrel? Rounds cycle but the primers are popping out. 223 runs fine. Overgas?
Click to expand...

Usually hot rounds. Happened to me with Federal Independence XM193I on Tavor’s but not AR. Happened on Norinco 5.56 on both AR and Tavor’s.

What rounds are you using?
 
tsarmn said:
Anyone having trouble using 5.56 in MRA's 18.5 inch mid length gas barrel? Rounds cycle but the primers are popping out. 223 runs fine. Overgas?
Click to expand...

Sounds like a ammo problem....are you using independence m193? That's very hot stuff. I have a MS with a WK180 take off barrel which is a carbine length. Needed to use an adjustable gas block to make it run decent, it was way over gassed.
 
AMET said:
Sounds like a ammo problem....are you using independence m193? That's very hot stuff. I have a MS with a WK180 take off barrel which is a carbine length. Needed to use an adjustable gas block to make it run decent, it was way over gassed.
Click to expand...

I want my build to run everything. What should I do? Adjustable gas block? New barrel? New buffer?
 
As stated above the XM193 is very hot ammo. It's not the guns fault the primers are popping out it's the ammos fault. Dont shoot it anymore. That's the only way to fix your problem. The primer pops out within the first inch of the barrel. Thats where the most pressure is generated. As the bullet travels down the barrel pressure decreases. Adding an adjustable gas block will only tune how your cases eject. Same with a heavier buffer. I new barrel with a slower twist like a 1:12 might solve the problem but that limits you to 55gr bullets and under. Either shoot different ammo or gas cut your bolt face. Those are your 2 options.
 
apex survival said:
Do the non-adjustable TriggerTech triggers drop right in on the MS?
Click to expand...

Yes it was only the adjustable and now diamond that wouldnt fit due to the set screw used to adjust trigger pull weight. The new run of uppers and lowers have had this issue addressed and are supposed to be able to fit the adjustable and diamond triggertech triggers now. I think...
 
greg olmstead said:
As stated above the XM193 is very hot ammo. It's not the guns fault the primers are popping out it's the ammos fault. Dont shoot it anymore. That's the only way to fix your problem. The primer pops out within the first inch of the barrel. Thats where the most pressure is generated. As the bullet travels down the barrel pressure decreases. Adding an adjustable gas block will only tune how your cases eject. Same with a heavier buffer. I new barrel with a slower twist like a 1:12 might solve the problem but that limits you to 55gr bullets and under. Either shoot different ammo or gas cut your bolt face. Those are your 2 options.
Click to expand...

Thank you for your insight! I will stay away from xm193.
 
Is xm855 okay to shoot out of a 5.56 18.6” barrel? Mid length gas and 1:7 twist. Or should I just buy bulk .223 instead? I don’t have my receiver set yet I’ve just slowly been buying ammo.
 
no-one special said:
While at the shop today on unrelated business, all the guys are hustling back and forth between the 2 shops with lowers in various stages of completion. I was told some lowers are out for anodizing and they should be back in the next week or 2. I felt sorry for Rick today running his ass off as Dustin and Shaun are away to TACCOM for the week. 2 phones ringing, emails to deal with and guys like me wanting buy stuff is a lot for 1 guy to manage at once.

Like Rick keeps pointing out they can be making lowers or answering emails, phone calls and entertaining drop ins who are there just to waste some time but not both.

From experience with several other guns they have built for me, when they say they will call when it is ready, they DO!

Apparently all of the uppers for runs 2&3 are done, and lowers are being run now and yes Qwerty1zer they are making aLARGE batch as in close to 1000 lowers . There are literally pallets of blocks stacked up awaiting their turn in a machine.

Patience guys, all good things will come. From what I saw today things are getting real close.
Click to expand...

Glad I read this. Sent an email last week to see if they received my handguard to be sent off to get cerakoted with my reciever sets but I'll hold off on sending another.
 
leakproofpuma7 said:
Glad I read this. Sent an email last week to see if they received my handguard to be sent off to get cerakoted with my reciever sets but I'll hold off on sending another.
Click to expand...

I imagine the boys can type pretty well but let me tell you watching Rick navigate a keyboard is painful to say the least. Sorry dude:p
 
You must log in or register to reply here.
Back
Top Bottom