Modern Sporter photo thread

My friend Mike just put these two together today. One is a Modern Sporter with an IBI 19" .223 Wylde 1in8 twist barrel and the other is it's big brother the Stag 10 with an IBI 19" .243 Winchester 1in10 twist barrel. He's just waiting for the opitc for the MS to arrive in the mail.

He says to pass the msg along that his funds are getting pretty low from buying up all these scary rifles so if you're thinking of selling to him you better do it sooner than later.

View attachment 340411

Good looking guns. Mike is a fortunate man......

Can you ask him if those are Hyperlight hand guards?
 
My friend Mike just put these two together today. One is a Modern Sporter with an IBI 19" .223 Wylde 1in8 twist barrel and the other is it's big brother the Stag 10 with an IBI 19" .243 Winchester 1in10 twist barrel. He's just waiting for the opitc for the MS to arrive in the mail.

He says to pass the msg along that his funds are getting pretty low from buying up all these scary rifles so if you're thinking of selling to him you better do it sooner than later.

View attachment 340411

These guns are awesome, My friend Mike is still waiting the 3rd run receiver set, and the IBI 19" .223 wylde barrel too:cool:
 
pLhBgUq.jpg

After much tinkering, my friend mike has finally done his. Parts list below!

Top:
Faxon 18.6" Gunner
SLR .625 Gas block
Spike's Melonited Gas Tube
Geissele MK14 13" FDE
Geissele SD-SSP
Geissele Lower Parts Kit
Geissele Airborne Charging Handle FDE
Geissele Maritime Bolt Catch
Magpul Mlok Vertical Grip FDE
Magpul K2 Grip
Magpul MBUS Pro Set
Magpul QD RSA
Brownell's M16 Nitride BCG
Aero Upper Parts Kit
BCM Buffer tube
Flat Wire buffer spring
Eotech EXPS3-0 Tan
Eotech G33.STS
Streamlight Rail Mount
B5 Sopmod Bravo Coyote Tan Stock

Mid:
Faxon 18.6" Gunner
SLR .625 Gas block
Spike's Melonited Gas Tube
Daniel Defense M4A1 RIS II FDE
Geissele SD-3G
Geissele Lower Parts Kit
Geissele Maritime Bolt Catch
Tangodown Vertical Grip FDE
Magpul K2 Grip
Knight's Micro BUIS
Brownell's M16 Nitride BCG
BCM Charging Handle
Aero Upper Parts Kit
BCM Buffer tube
Flat Wire buffer spring
GEAR Sector QD Sling Mount
Eotech EXPS3-0 Tan
B5 Sopmod Coyote Tan Stock

Bottom:
ACR Melonited Hammer Forged 18.6" Midlength Barrel, gov't profile, modified gas port.
Brownells Nitride Gas Block
Spike's Melonited Gas Tube
Geissele MK14 13" Black
Geissele SD-SSP
Geissele Lower Parts Kit
Geissele Maritime Bolt Catch
Harris HBRMS Bipod
Magpul Mlok Vertical Grip Black
Magpul K2 Grip
Magpul MBUS Pro Set
Magpul QD RSA
Magpul Mlok Bipod Mount
Brownell's M16 Nitride BCG
Aero Upper Parts Kit
BCM Buffer tube
Flat Wire buffer spring
Schmidt & Bender Shortdot 1.1-4
Streamlight Rail Mount
ADM 30MM Recon Mount
BCM Charging Handle
B5 Sopmod Black Stock
 
fricken sweet!!!

pLhBgUq.jpg

After much tinkering, my friend mike has finally done his. Parts list below!

Top:
Faxon 18.6" Gunner
SLR .625 Gas block
Spike's Melonited Gas Tube
Geissele MK14 13" FDE
Geissele SD-SSP
Geissele Lower Parts Kit
Geissele Airborne Charging Handle FDE
Geissele Maritime Bolt Catch
Magpul Mlok Vertical Grip FDE
Magpul K2 Grip
Magpul MBUS Pro Set
Magpul QD RSA
Brownell's M16 Nitride BCG
Aero Upper Parts Kit
BCM Buffer tube
Flat Wire buffer spring
Eotech EXPS3-0 Tan
Eotech G33.STS
Streamlight Rail Mount
B5 Sopmod Bravo Coyote Tan Stock

Mid:
Faxon 18.6" Gunner
SLR .625 Gas block
Spike's Melonited Gas Tube
Daniel Defense M4A1 RIS II FDE
Geissele SD-3G
Geissele Lower Parts Kit
Geissele Maritime Bolt Catch
Tangodown Vertical Grip FDE
Magpul K2 Grip
Knight's Micro BUIS
Brownell's M16 Nitride BCG
BCM Charging Handle
Aero Upper Parts Kit
BCM Buffer tube
Flat Wire buffer spring
GEAR Sector QD Sling Mount
Eotech EXPS3-0 Tan
B5 Sopmod Coyote Tan Stock

Bottom:
ACR Melonited Hammer Forged 18.6" Midlength Barrel, gov't profile, modified gas port.
Brownells Nitride Gas Block
Spike's Melonited Gas Tube
Geissele MK14 13" Black
Geissele SD-SSP
Geissele Lower Parts Kit
Geissele Maritime Bolt Catch
Harris HBRMS Bipod
Magpul Mlok Vertical Grip Black
Magpul K2 Grip
Magpul MBUS Pro Set
Magpul QD RSA
Magpul Mlok Bipod Mount
Brownell's M16 Nitride BCG
Aero Upper Parts Kit
BCM Buffer tube
Flat Wire buffer spring
Schmidt & Bender Shortdot 1.1-4
Streamlight Rail Mount
ADM 30MM Recon Mount
BCM Charging Handle
B5 Sopmod Black Stock
 
Top:
Faxon 18.6" Gunner
SLR .625 Gas block
Spike's Melonited Gas Tube
Geissele MK14 13" FDE
Geissele SD-SSP
Geissele Lower Parts Kit
Geissele Airborne Charging Handle FDE
Geissele Maritime Bolt Catch
Magpul Mlok Vertical Grip FDE
Magpul K2 Grip
Magpul MBUS Pro Set
Magpul QD RSA
Brownell's M16 Nitride BCG
Aero Upper Parts Kit
BCM Buffer tube
Flat Wire buffer spring
Eotech EXPS3-0 Tan
Eotech G33.STS
Streamlight Rail Mount
B5 Sopmod Bravo Coyote Tan Stock

Mid:
Faxon 18.6" Gunner
SLR .625 Gas block
Spike's Melonited Gas Tube
Daniel Defense M4A1 RIS II FDE
Geissele SD-3G
Geissele Lower Parts Kit
Geissele Maritime Bolt Catch
Tangodown Vertical Grip FDE
Magpul K2 Grip
Knight's Micro BUIS
Brownell's M16 Nitride BCG
BCM Charging Handle
Aero Upper Parts Kit
BCM Buffer tube
Flat Wire buffer spring
GEAR Sector QD Sling Mount
Eotech EXPS3-0 Tan
B5 Sopmod Coyote Tan Stock

Bottom:
ACR Melonited Hammer Forged 18.6" Midlength Barrel, gov't profile, modified gas port.
Brownells Nitride Gas Block
Spike's Melonited Gas Tube
Geissele MK14 13" Black
Geissele SD-SSP
Geissele Lower Parts Kit
Geissele Maritime Bolt Catch
Harris HBRMS Bipod
Magpul Mlok Vertical Grip Black
Magpul K2 Grip
Magpul MBUS Pro Set
Magpul QD RSA
Magpul Mlok Bipod Mount
Brownell's M16 Nitride BCG
Aero Upper Parts Kit
BCM Buffer tube
Flat Wire buffer spring
Schmidt & Bender Shortdot 1.1-4
Streamlight Rail Mount
ADM 30MM Recon Mount
BCM Charging Handle
B5 Sopmod Black Stock

That's a whole lotta ###y right there.

Nice job!
 
My friend in a different province had some random parts so put together sort of an SP1-ish rifle. Nothing high-end, just old Colt stuff. He was here visiting yesterday, hence the pic with my horrid orange lawn chair in my shop. He's gone now, and his rifle too.

umyPWPh.jpg
 
Last edited:
Somebody will probably ask what brand of safety selector detent spring my buddy Mike used, but most of you will likely just be interested to know that this is a 18.6" Faxon barrel with a 13.5" Maple Ridge Armory handguard and TNA's new reverse fake can/compensator.

IMG_20200122_1523404~2.jpg

Can't wait for it to warm up and take her for a spin before Mike goes back to Canmore.
 

Attachments

  • IMG_20200122_1523404~2.jpg
    IMG_20200122_1523404~2.jpg
    54.7 KB · Views: 2,332
My friend in a different province had some random parts so put together sort of an SP1-ish rifle. Nothing high-end, just old Colt stuff. He was here visiting yesterday, hence the pic with my horrid orange lawn chair in my shop. He's gone now, and his rifle too.

umyPWPh.jpg

Very cool old school build Sir!
 
Somebody will probably ask what brand of safety selector detent spring my buddy Mike used, but most of you will likely just be interested to know that this is a 18.6" Faxon barrel with a 13.5" Maple Ridge Armory handguard and TNA's new reverse fake can/compensator.

View attachment 343257

Can't wait for it to warm up and take her for a spin before Mike goes back to Canmore.

Good looking gun! Familiar looking scope too......;)

So what length gas system is on that baby? Does the reverse can compensator make it front heavy? Be curious to hear if it reduces the recoil much.
 
Back
Top Bottom