My Mossberg 715T Flat Top
- Thread starter Temps
- Start date
Trs-25!
I had the HD7 on both the carry handle and flat top versions.
I also had 6 extra mags. Simply awesome gun. Alot less fussy than my 10/22. Shot better than a stock 10/22 IMO.
The gun is light for a reason, IMO Id just put sights on it and call it good.
I took my side rails off. It felt better to shoot offhand this way. I also found the stock sights were way off. I had to almost max out the rear sight to align with poi. Did you find this?
Does your manual say not to shoot Stingers or other hyper vol ammo?
I remember one of my manuals said it but I cant remember which gun.
I hope you have a blast shooting and be careful not the strip the screws in the plastic!
I sold both of mine because of the pain of takedown for cleaning
I had the HD7 on both the carry handle and flat top versions.
I also had 6 extra mags. Simply awesome gun. Alot less fussy than my 10/22. Shot better than a stock 10/22 IMO.
The gun is light for a reason, IMO Id just put sights on it and call it good.
I took my side rails off. It felt better to shoot offhand this way. I also found the stock sights were way off. I had to almost max out the rear sight to align with poi. Did you find this?
Does your manual say not to shoot Stingers or other hyper vol ammo?
I remember one of my manuals said it but I cant remember which gun.
I hope you have a blast shooting and be careful not the strip the screws in the plastic!
I sold both of mine because of the pain of takedown for cleaning
Fun little gun! I picked up mine last summer and have a blast with it. I had the same issue with the sights being WAY off, nearly maxed the rear sight all the way to the right... I think my manual also said not to shoot the high velocity ammo, could be the reason I have jamming/stovepipe issues. I found a YouTube video on how to supposedly fix it, but haven't gotten around to it.
As for accessories, I just threw on a cheap Canadian Tire laser (cause why not), a Magpul AFG2, and an Ebay sling. I was going to get a cheap red dot sight, but I didn't feel like ordering it. The stock sights are fine for what I'm doing anyway.
As for accessories, I just threw on a cheap Canadian Tire laser (cause why not), a Magpul AFG2, and an Ebay sling. I was going to get a cheap red dot sight, but I didn't feel like ordering it. The stock sights are fine for what I'm doing anyway.
Last edited:
czechsanchez
Regular
- Location
- Fraser Valley
I just got a g36 handle/scope for mine and threw on a angled foregrip.
I think im gonna mount a small holo sight up top too
I think im gonna mount a small holo sight up top too
Unfortunately my 715T jams so much its no fun to shoot anymore. I've tried all kinds of fixes and ammo types to no avail. I would sell it but I don't want to pass on the problems. Other than the jamming though - it was great fun to shoot and non-restricted made it possible to take it with me into the woods.
Hey bro mine really is only happy with cci Mini mags and you need to make sure the magazines are loaded perfect if its 25 rounds or load only 23, Also I guess that any premium round nose jacketed round would work well also, Otherwise theres something wrong because I Have a Flat Top and a normal one and no issues other than Magazine feed (packed wrong) or wrong ammo they run flawless
czechsanchez
Regular
- Location
- Fraser Valley
Magflex:
try buying cci blazer ammo.
mine was jamming every single round with ####ty bulk winchester and thunderbolt even.
CCI Blazer is like 30 bucks for a 500 brick and fires like a hot knife through butter
try buying cci blazer ammo.
mine was jamming every single round with ####ty bulk winchester and thunderbolt even.
CCI Blazer is like 30 bucks for a 500 brick and fires like a hot knife through butter
Wow must have lucked out all 7 mags fed fine. Ive read that people had issues with the mags. I tried AE, dynapoint, win HV and cci. The only issues I had was grouping with the HV. Its too bad you dont live closer. Id buy the 715t from you.
Sounds like it need a new buffer block. send it to Gretch in mount forest it will work after.
- Location
- Eastern Ont.
Dont send it to Gretch with a 25 round mag or you will get rifle back with a 10 rounder and sans 25.
Just oil and shoot the rifle till it and mags break in and it should shoot fine with most brands.
As for the guys with the maxed out rear sights.
The front sight can be adjusted by pressing down on the index lock then turn the sight post in or out.
All the oil in the world wont make a rifle with a broken part work......
true, not to mention alot of oil is not good in a semi, i use 1 tiny drop in all mine after cleaning, be careful gets gummed up with too much oil, fun rifle enjoy, my daughters eats pretty much all ammo so if it dont after a thorough cleaning theres prob something wrong
I just got a g36 handle/scope for mine and threw on a angled foregrip.
I think im gonna mount a small holo sight up top too
Where did you get the fore grip from? Can't find anything local.
Local shop sold me a magpul fore grip but it doesn't look compatible
I've never tried the Magpul AFG that I have on my VZ on the 715T but I have heard the cheap Chinese copies work well.
I put at least 10k rounds through mine and I loved it! very accurate!
After having to get rid of all my 25 round mags I was pretty upset, so I sold my gun.
Clean it after each use, and if you do disassemble the gun be careful not to bend the recoil spring.
Walther reflex, magpul afg, fab defense foregrip/bipod, Walther tac flashlight. *Can still see the iron sights with reflex on*
After having to get rid of all my 25 round mags I was pretty upset, so I sold my gun.
Clean it after each use, and if you do disassemble the gun be careful not to bend the recoil spring.
Walther reflex, magpul afg, fab defense foregrip/bipod, Walther tac flashlight. *Can still see the iron sights with reflex on*
