Mystery Box Containing Enough Parts to Build an AR15

[Chumlee Bumsnag]

The barrel nut that came with mine requires a 1/2" drive 1&1/16" open end crowfoot wrench. Or 3/8 drive depending on you torque wrench.

 

[Chumlee Bumsnag]

How about a mystery tool box. Say...an armorers tool, bev block, roll pin punch, torque wrench, etc...

 

[William_mississauga]

What would the retail be for a rile like these

 

[CnidarianKing]

What would the retail be for a rile like these

My rough estimate for each part puts the complete rifle without optic at around $1000-$1200. Pretty great deal for $800 all-in and an evening of work.

Great final product, i'm really liking what they put into it! Although i'm missing a single roll-pin to put the forward assist in (not sure if it was lost in shipping as the forward assist bag wasn't sealed like the rest), so that, the gas system and shopping for a proper optic are my job until i get my cert from the RC's

 

[Mike112288]

Scooby like mystery box!! (Scooby laugh) lol

 

[William_mississauga]

Thanks for the info, It's going to be my first ar build. From the pic I have seen they look great.

 

[William_mississauga]

Went ok so far
Next would be to check head space, trigger, anything else?

https://www.dropbox.com/s/z99p0gi4k9xcoky/20181019_165634.jpg?dl=0

 

[Ryang5177]

super happy with mine! just have to get to the range and pick up the front sight!

 

[McGral]

I've made a mistake...

This should be flat


PSA:
Do not send the bolt forward without the barrel attached.
Things happen
Bad things


On the bright side, I could get one of these in Gold to match the bolt
https://truenortharms.com/ar15_default_store_view/butterfly-ambi-charging-handle.html


I'm also not sure about this Buffer wear

Normal? Or just because of the damaged charging handle?



Good news is, that Clevis Pin trick works perfectly for the front takedown pin.

 

[Chumlee Bumsnag]

I mortared the pivot pin detent and it hit the ceiling and landed on top of my head and stayed there. Sweet hair!

 

[BarrieON]

Wrong quote. Deleted.

 

[William_mississauga]

Got my regerstation done today for the finish build but was a little surprised when asked how many round it would hold, is this normal?

 

[FyreFighter]

Correct answer is "detachable magazine".

 

[William_mississauga]

Ok Thanks

 

[Carby91]

Will you ever do this again?

 

[Tarrantula]

https://truenortharms.com/ar15_default_store_view/catalogsearch/result/?q=mystery

 

[Cameron SS]

Will you ever do this again?

It seems to be a standing offer now. Look for the Mystery box V3.

Just ordered one and look forward to chronicalling the journey of my first AR Build....

 

[JasonGTA]

Got my regerstation done today for the finish build but was a little surprised when asked how many round it would hold, is this normal?

Ar-15s cant hold any rounds because they dont have opposable thumbs

 

[Tarrantula]

FWIW if TNA reads this the link in the OP is wrong, leads to an unsuccessful search.

An easier link would be just to search "mystery".

 

[Cameron SS]

FWIW if TNA reads this the link in the OP is wrong, leads to an unsuccessful search.

An easier link would be just to search "mystery".

And they are currently using Anderson receiver sets.