NEA/BCL 102 FAQ Thread

[Outcast]

afer many years I have come to a conclusion, it is simple, really. lots of retards here[/QUOTE

Say it ain't so billy......

 

[BattleRife]

According to you, AR10's are non restricted? Really? Show me a NR AR10 i can buy....i'll be waiting...

There are hundreds of Artillerie Inrichtingen manufactured AR10s in Canada, and none of them are restricted.

Of course, that doesn't mean you can buy them, as virtually all are prohibited due to the full auto receiver. But the design itself is not restricted.

 

[zuke]

I understand that, what i dont understand, is certain members here are trying VERY hard to link the NEA102 to the AR15...are these people trying to get RCMP's opinion of NR overturned? To what end are they continually coming out with "well, duuh, i just dont see a difference between the 102 and an AR15...deerp"

Look at most SUV's today. At first glance a lot look the same. But when they take a better look they see the difference.
If they don't see the difference it's either because of a hate on, tunnel vision or the opinion is coming from a FUDD

 

[HHollow]

There are hundreds of Artillerie Inrichtingen manufactured AR10s in Canada, and none of them are restricted.

Of course, that doesn't mean you can buy them, as virtually all are prohibited due to the full auto receiver. But the design itself is not restricted.

Simple solution already imlemented south of the border. If you want to inherit grampa's Dutch AR10 then make a replacement lower receiver for it.

 

[fenceline]

There are hundreds of Artillerie Inrichtingen manufactured AR10s in Canada, and none of them are restricted.

Of course, that doesn't mean you can buy them, as virtually all are prohibited due to the full auto receiver. But the design itself is not restricted.

The lab says otherwise on the frt entry for the ar10klm and ar102 entries.

 

[onetwentyish]

I suspect I would get an infraction for that. I will wait to see what happens here.

Perhaps you need someone to start a new thread for you to post in....

 

[blaxsun]

I understand that, what i dont understand, is certain members here are trying VERY hard to link the NEA102 to the AR15...are these people trying to get RCMP's opinion of NR overturned? To what end are they continually coming out with "well, duuh, i just dont see a difference between the 102 and an AR15...deerp"

So when is the BCL 102 going to be released in 223?

 

[ljones]

So when is the BCL 102 going to be released in 223?

 

[Sqr]

^^this^^

 

[Curtis264]

So when is the BCL 102 going to be released in 223?

They said they have no intention in releasing it in .223, RCMP may class it as a variant. Possibly .243, 6.5 creedmoor, looks like everything based on the .308 winchester case, I hope they do .338 Federal

 

[driller212]

They said they have no intention in releasing it in .223, RCMP may class it as a variant. Possibly .243, 6.5 creedmoor, looks like everything based on the .308 winchester case, I hope they do .338 Federal

Hey was joking

 

[blaxsun]

Hey was joking

Hehe... guess it went over the heads of a few people.

 

[ljones]

Hehe... guess it went over the heads of a few people.

View attachment 112638

Nope just always wanted to use the slap smiley, and that was the perfect opportunity, nothing serious about it

 

[allarile260]

Can't wait for a real range report

 

[BioPace]

Can't wait for a real range report

Seriously! What the hell are all these people doing? I need to live vicariously dammit!

 

[jona710]

I've never had an AR type rifle and I read that this would have a mil spec buffer tube that's "slightly longer". I'm not sure what that translates to in terms of furniture as I've never had anything I could do that type of modifications to. . If I ordered a mil spec stock from hogue will it still go on?

 

[Curtis264]

If it is a Milspec buffer tube, then you you can put another milspec butt stock on it, even with the added lenght

 

[Lobster_pot]

I've never had an AR type rifle and I read that this would have a mil spec buffer tube that's "slightly longer". I'm not sure what that translates to in terms of furniture as I've never had anything I could do that type of modifications to. . If I ordered a mil spec stock from hogue will it still go on?

It "should" fit. Might not collapse all the way to receiver because it is longer

 

[DaveMachine]

Seriously! What the hell are all these people doing? I need to live vicariously dammit!

If I had mine, I'd be doing a range report.

 

[allarile260]

If I had mine, I'd be doing a range report.

Me too, I'd be unboxing it at the range and working through developed loads I had from 150gr to 168smk's. I might have to order one out of spite