Norinco brand

I bought my Norc 1911 from ARMCO and the thing shoots like a house on fire. The tighten and tune he does is great. One day I put two shots in the same hole at 20 yards (after lots of practice). It doesn't like feeding on the last round, but this is just a mag problem. Testing out new mags this week. I had an NP29 thinking the 9mm would save me a bit of money with the same pistol, but it just wasn't the same as the .45 so I sold it. It was still a great pistol though.

Very, very impatiently waiting for my NP34.
 
I have yet to have a bad experience with a Norinco firearm.
They are good to go in my books.
I own one and have another on the way in the mail.
I have shot many many a Norinco firearm. They are accurate, reliable and best of all, very cheap.
Who gives a sh*te if it's made in China, as long as it does what it's supposed to and doesn't cost more than a kidney I'm in.

A lot of guys hate on them because of the fit and finish etc To me that's a cosmetic deficiency and I don't buy guns to look pretty in my locker while I fawn over them, I shoot the sh*t out of my firearms and they are good enough for this guy.
 
great value guns, have rough edges here and there, and who ever assembles some of them does not care too much (off center sights are common and are my biggest issue)

some of them need some TLC to get working smoothly
 
image_zps3340a732.jpg


Love them!
 
Originally Posted by Youngfreshtoodeath
It's more like the Honda of the gun world...
Humm... I would definatly not compare Norinco to Toyota or Honda... They're good starter guns for the money.

No, actually Honda is a very good comparison - think motorcycles not cars and especially when Honda first moved into the worldwide motorcycle market in the 1960s.

Honda produced and sold a small motorcycle - the Cub. They didn't design it to be a recreational vehicle but to provide efficient, affordable transportation to people who could not afford or did not want a car or other full-size motor vehicle. The Honda Cub had a small 50 to 90cc engine and an easy-to-operate semi-automatic transmission. It was cheap, extremely reliable and simple to operate. It wouldn't get you anywhere fast, but it would get you wherever you wanted to go - on dirt tracks, if necessary, with your whole 3rd World market stall of goods piled on the back of the bike. About the only maintenance it needed was gas, oil and air in the tires.

Lovers of existing British, European and American motorbikes derided the Hondas for sounding like sewing machines and "having no soul". I think "no soul" meant they didn't leak oil every time they parked like the British bikes, didn't have zillions of aftermarket parts available for custom touches - but also didn't need wrench time every week - like the American bikes, and cost about half as much as most bikes on the market.

Fifty years later, Honda has sold over 100 million Cubs worldwide, making it the most produced motor vehicle on the planet ((not motorcycle, motor vehicle), many of the original Cubs are still on the road around the world, and Honda is still producing them (with improved engines but otherwise the same model) in factories in Asia and South America. They aren't glamorous, ###y or sporty motorbikes, but they are utilitarian and work perfectly in rough conditions long after the glitzier models have broken down.

So yeah, I think maybe Norincos are the Hondas of the gun world.

Actually, though, the problem I see when people compare Norincos to North American firearms is that they compare the Norincos to the wrong firearms - mainly because the right firearms aren't produced much in North America anymore.

A Norinco is the modern equivalent of those ubiquitous economy hunting firearms that were made and sold in the millions during most of the 20th century (until about 1970 or so): plain-Jane .22 rifles and single-shot or pump shotguns with names on them like Cooey, CIL, or JC Higgins, Sears Roebuck and other "store brands". They weren't designed to be masterpieces of the gunsmith's art or to sit in a safe and become family heirlooms; they were built as rugged farm and country utility tools to be worked long and hard until they were finally worn out - just like a hardware store shovel, scythe or axe.

In handguns, the similar equivalent would be all the handy little economy-grade .22s and small revolvers made by companies like Iver Johnson. Again, they were not designed to be masterpieces of art or foundations for custom accessorizing but to be simple, cheap reliable tools for target practice, pest control and self-defence.

If you consider Norinco rifles, shotguns and handguns in that light, they look a whole lot different than if you insist on comparing them to semi-custom tweaked 1911s and ARs.

BTW, in some ways I find the "they make good starter guns" comment funny: for diehard gun lovers, this may be true. Similarly, in earlier generations, many shooters probably started with store-brand guns, then "graduated" to fancier toys. But for millions of utility users, the store-brand "starter guns" were actually their "good enough" "ending guns". And for someone who just wants to enjoy plinking, casual target shooting or basic hunting and pest control, I expect a Norinco shotgun, rifle or pistol will also be more than "good enough".
 
Last edited:
No, actually Honda is a very good comparison - think motorcycles not cars and especially when Honda first moved into the worldwide motorcycle market in the 1960s.

Honda produced and sold a small motorcycle - the Cub. They didn't design it to be a recreational vehicle but to provide efficient, affordable transportation to people who could not afford or did not want a car or other full-size motor vehicle. The Honda Cub had a small 50 to 90cc engine and an easy-to-operate semi-automatic transmission. It was cheap, extremely reliable and simple to operate. It wouldn't get you anywhere fast, but it would get you wherever you wanted to go - on dirt tracks, if necessary, with your whole 3rd World market stall of goods piled on the back of the bike. About the only maintenance it needed was gas, oil and air in the tires.

Lovers of existing British, European and American motorbikes derided the Hondas for sounding like sewing machines and "having no soul". I think "no soul" meant they didn't leak oil every time they parked like the British bikes, didn't have zillions of aftermarket parts available for custom touches - but also didn't need wrench time every week - like the American bikes, and cost about half as much as most bikes on the market.

Fifty years later, Honda has sold over 100 million Cubs worldwide, making it the most produced motor vehicle on the planet ((not motorcycle, motor vehicle), many of the original Cubs are still on the road around the world, and Honda is still producing them (with improved engines but otherwise the same model) in factories in Asia and South America. They aren't glamorous, ###y or sporty motorbikes, but they are utilitarian and work perfectly in rough conditions long after the glitzier models have broken down.

So yeah, I think maybe Norincos are the Hondas of the gun world.

Actually, though, the problem I see when people compare Norincos to North American firearms is that they compare the Norincos to the wrong firearms - mainly because the right firearms aren't produced much in North America anymore.

A Norinco is the modern equivalent of those ubiquitous economy hunting firearms that were made and sold in the millions during most of the 20th century (until about 1970 or so): plain-Jane .22 rifles and single-shot or pump shotguns with names on them like Cooey, CIL, or JC Higgins, Sears Roebuck and other "store brands". They weren't designed to be masterpieces of the gunsmith's art or to sit in a safe and become family heirlooms; they were built as rugged farm and country utility tools to be worked long and hard until they were finally worn out - just like a hardware store shovel, scythe or axe.

In handguns, the similar equivalent would be all the handy little economy-grade .22s and small revolvers made by companies like Iver Johnson. Again, they were not designed to be masterpieces of art or foundations for custom accessorizing but to be simple, cheap reliable tools for target practice, pest control and self-defence.

If you consider Norinco rifles, shotguns and handguns in that light, they look a whole lot different than if you insist on comparing them to semi-custom tweaked 1911s and ARs.

BTW, in some ways I find the "they make good starter guns" comment funny: for diehard gun lovers, this may be true. Similarly, in earlier generations, many shooters probably started with store-brand guns, then "graduated" to fancier toys. But for millions of utility users, the store-brand "starter guns" were actually their "good enough" "ending guns". And for someone who just wants to enjoy plinking, casual target shooting or basic hunting and pest control, I expect a Norinco shotgun, rifle or pistol will also be more than "good enough".

I like your comparaison with the Honda Cub; it's a bit what I meant by "starter gun"; They're a cheap, generally reliable and will go bang when you pull the trigger. They're also great for people who want to try without investing too much to see if they like the sport; Most people first car generally aren't Porsches :) Wether they're "good enough" or "ending gun" well... It all depends on your standards, how deep are your pockets and in what type of shooting you want to get involved.

Now my experience with the brand: Norc NP-29. Finish was.. alright. A lot of sharp edges, clunky (but not as much as some SR-1911 I've seen), and you better be careful when you strip that thing because you can cut yourself pretty bad. The sights were off a bit but nothing that could not be fixed. Definatly not a bullseye pistol but I could get some decent group out of it. The mags were crap so I had to invest in some aftermarket mags (Which are kinda add a considerable amount to the total price). I have to admit, with all the praise and fan base here, my expectation were kinda high but I quickly realized that that 350$ pistol was not worth much more than that.

Then again, this is my experience and my sample size was only 1 unit. Maybe they've improved since then or maybe I got a "not so nice" specimen. The good thing about this is that you can generally sell them with minimal loss so there was a happy ending to my story :D
 
Had to chime in here because I bought the 870 pump Norinco 12ga and the Norinco M14. . .So far they are working really well. about 100rds through each. Only complaint with the shotgun is after it fires the slide moves back a bit--but that's more user error because the gun is so short and the kick makes you pull back on the slide. I've fired plenty of 3 inch slugs with it. The M14 has amazing accuracy and I am considering buying another.

Are they good guns? Time will tell I guess, but so far I am pleased. . .guns are NOT super sophisticated things like computers. . .why wouldn't China manufacture guns well??
 
They have definitely improved in quality and reputation since I've been on CGN, it seems.
There are some problems that need to be addressed (M14 headspacing issues) before I'd be willing to put some models close to my face (and the 780 should be pulled off the market altogether!) but the replicas of iconic models such as the Remington 870, 1911 and the Sig P226/8 series is definitely shown to be a good buy for the price.
 
Norinco...Chinese word for poo!!! :p

Nah I kid, I kid...

They are okay for what they are...do NOT expect CZ quality for 1/3 the price tho, that is just silly. They work (usually) but may need some minor hand work done by you.
 
Last edited:
do NOT expect CZ quality for 1/3 the price tho, that is just silly. They work (usually) but may need some minor hand work done by you.

I have found the exact opposite, none have required any work other than mods I wanted to do. All have run with no issues. One is set to outpace my G34 for reliability within the initial 10K.
As far as quality goes, I'd take my two Norc 1911's over my old 1500 match grade, overrated POS, any day, everyday and twice on Sunday.
 
Back
Top Bottom